timing belt replacement on '90 Turbo 200
Guest
Posts: n/a
> For DIY you will need to borrow or rent a special tool that holds the crank
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
Guest
Posts: n/a
> For DIY you will need to borrow or rent a special tool that holds the crank
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
Guest
Posts: n/a
> For DIY you will need to borrow or rent a special tool that holds the crank
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
> shaft to loosed and re tighten the main bolt to 240 ft/lbs. If you buy the parts
> from an on line source you can usually rent the tools.
332 lb ft - 450 Nm at the bolt.
http://www.isham-research.co.uk/quattro/torque.html
Thread
Thread Starter
Forum
Replies
Last Post
guhbuhjuh
A4-B6 - (Typ 8E/8H, 2001–2005)
6
Jan 7, 2013 10:20 PM
latchkeykid
Audi parts for sale & wanted.
0
Jul 25, 2009 07:08 PM
Jessie2K
Performance Parts & Tuning
2
Aug 7, 2008 10:53 AM
Courtney Thomas
Audi Mailing List
0
Aug 15, 2005 08:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



