Notices

cel and more after triyng to reprog switchblade

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Oct 2, 2010 | 12:08 PM
  #1  
ALEKS's Avatar
Thread Starter
Audi Forum - Posts like an A1
 
Joined: Oct 2010
Posts: 8
From: Montreal
ALEKS is on a distinguished road
Default cel and more after triyng to reprog switchblade

Hey Guys,
Brand new member, with a not so brand new 2005 A4 Avant Quattro Nice to join you.
So, as i looked thru some posts, i saw the one from 1move about reprogramming a switchblade key. Since I had to replace the battery on the one that never been used, the lock/unlock buttons do not work, but i do can unlock and start the car manually.
So i tried 3 differents methods, taken from that thread, with different keys, different switch position, with and without starting the car couples of times and none worked.
So i gave up, having at least 1 good remote, and the other one manually working.
This morning, i took the car out and when i started it, CHRISTMAS!!, Check engine, esp. Althought the check sequence showed OK
I read the dtc (with my obdII) and 13 (7 of them doubled ) codes came off! Most were related to the evap system, HO2S, o2 sensors.... I flushed them, and 7 came back, flushed again, and now it's none, but the yellow obdII led is blinking. Check engine's gone, but esp remains.
Question is: Could the multiple tries on the switchblade prog. while putting the key on start and with starting the car 2-3 times in a row, have burn or short circuited something? Or by riding the car for an hour will reset things up??
Or i will have to go at the dealer? (by trying to avoid it....how ironic...)
Thanks!
Aleks from Montreal
Old Oct 2, 2010 | 02:01 PM
  #2  
1move's Avatar
iTrader: (1)
 
Joined: Nov 2007
Posts: 2,548
From: ....
1move is on a distinguished road
Default Re: cel and more after triyng to reprog switchblade

That sounds quite odd, first time I heard something like that happening, it could be related to something else. I am not sure why the key programming didn't work for you as I have tested it on a B6 and it works fine, even an avant. Could some of those codes been there prior to you trying to program the key? not sure if it would effect it any way but electronics are odd sometimes.

Take it for a drive and try to see if any of the codes come back and if you can post the scan on here.
Old Oct 2, 2010 | 03:16 PM
  #3  
ALEKS's Avatar
Thread Starter
Audi Forum - Posts like an A1
 
Joined: Oct 2010
Posts: 8
From: Montreal
ALEKS is on a distinguished road
Default Re: cel and more after triyng to reprog switchblade

Ok, after a drive, these codes came back: PO458, 0037,2257,0414,0102,2400, each of them 2 times!, and 0031

And new thing, ESP light stays on, and when i go from park to drive, it kicks hard....way harder than it was.

God, yesterday, before the testing, the car ran fine, and got inspected at the dealer! And now boom ....Doesn't look good to me, ESP fuses OK....

Start of a long week i guess!

Can i unplug the main battery and do a reset like? Or i will stall the car in my garage?

Last edited by ALEKS; Oct 2, 2010 at 04:05 PM. Reason: uncompl;et
Old Oct 7, 2010 | 05:52 PM
  #4  
ALEKS's Avatar
Thread Starter
Audi Forum - Posts like an A1
 
Joined: Oct 2010
Posts: 8
From: Montreal
ALEKS is on a distinguished road
Default Re: cel and more after triyng to reprog switchblade

Finally, a burned relay caused all the codes and transmission glitch....125$ at the dealer. Thanks vag-com!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ericmsmith19
A4-B5 - (Typ 8D, 1994–2001)
0
May 27, 2009 01:06 PM
KLS
Audi Mailing List
4
Jun 30, 2008 03:29 AM
KLS
Audi Mailing List
10
Dec 29, 2007 07:28 PM
Tony
Audi Mailing List
11
Oct 25, 2005 08:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 04:35 AM.