Anyone in Great Vancouver area has vag com?
#11
Re: Anyone in Great Vancouver area has vag com?
if you guys go onto dubberz there is a huge list of local guys that have it. Blitzkrieg in vancouver, autobahn in langley, JMP, JSP, Kinetic and then individuals.
#12
Re: Anyone in Great Vancouver area has vag com?
If you're seeing the P0182 code on your Vag-Com, you need to surf over to VW TDI timing belts, aluminum VW skid plates, VW short shift kits, VW G60 clutch, and Race Pipes by www.dieselgeek.com cause they now sell the fuel temp sensor and special triangular bolt socket *and* the top gasket which you will definitely need when doing this simple repair.
It is now 4/2. I received my cable from a seller on eBay, downloaded 409.1 VAG-COM software (free on the archives section of the ross-tech.com site), hooked the car up, turned the ignition on (do NOT start motor), got a connect to my laptop, ran the "01" diags check, saw the P0182 code, clicked on "clear code", shut down VAG-COM, unplugged cable from the car, turned the ignition off, removed the key,reinserted the key, started the car, and..........(drum roll please)............. the check engine light is off and has stayed off. ahhhh....sweet success!
It is now 4/2. I received my cable from a seller on eBay, downloaded 409.1 VAG-COM software (free on the archives section of the ross-tech.com site), hooked the car up, turned the ignition on (do NOT start motor), got a connect to my laptop, ran the "01" diags check, saw the P0182 code, clicked on "clear code", shut down VAG-COM, unplugged cable from the car, turned the ignition off, removed the key,reinserted the key, started the car, and..........(drum roll please)............. the check engine light is off and has stayed off. ahhhh....sweet success!
#13
Re: Anyone in Great Vancouver area has vag com?
need to re-program a new ECU from auto trans to manual, since my old ECU is busted..
anyone in greater vancouver area has vag come and be able to re-program it for me? i heard its very easy
will pay u or buy you beer and pizza if you like
Thanks a lot in advance
email me at kobe_8_wang at hotmail dot com
thanks again !
anyone in greater vancouver area has vag come and be able to re-program it for me? i heard its very easy
will pay u or buy you beer and pizza if you like
Thanks a lot in advance
email me at kobe_8_wang at hotmail dot com
thanks again !
#14
Re: Anyone in Great Vancouver area has vag com?
It is now 4/2. I received my cable from a seller on eBay, downloaded 409.1 VAG-COM software (free on the archives section of the ross-tech.com site), hooked the car up, turned the ignition on (do NOT start motor), got a connect to my laptop, ran the "01" diags check, saw the P0182 code, clicked on "clear code", shut down VAG-COM, unplugged cable from the car, turned the ignition off, removed the key,reinserted the key, started the car, and..........(drum roll please)............. the check engine light is off and has stayed off. ahhhh....sweet success!
My '99 B5 has the check engine light on. I am thinking about buying a cheap eBay Vag-Com. Which seller did you buy yours from?
Any suggestions would be greatly appreciated!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
hotgo
Eastern Canada discussion
7
11-15-2008 10:55 PM
akula-ssh
Western Canada discussion
0
02-21-2007 03:39 PM
akula-ssh
Western Canada discussion
0
01-30-2007 10:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)