rmicroys

Any ideas if this would be useful to Mk2 TT owners?

I had this made for my R8, and I understand that the TT Mk2 chassis has similar divots underside for the emergency jack - as such, it may prove useful to you guys. I have a bunch of them on hand, because when I went to get one of these made for my R8, it was going to cost about the same to make 10 of them as it was to just make 1. So I have about 10 of these jack adapters on hand. Unfortunately they all have a stylized "R8" laser etched on the bottom - as I figured I'd sell these only to R8 owners... but if they fit the Mk2 TT, then I figure I could offer them here. This should fit nicely in a jack which accommodates a 4" jack adapter. The load of the car is carried on the long curved section of the protrusion, the same design principle as the OEM emergency roadside jack.




The protrusion measures 69 mm long x 29 mm wide x 28 mm tall. Would this fit the OEM jack points in the rocker panels under the car?

rmicroys

Thanks for the interest. I sold them all. FWIW, I did sell a number of them to Mk2 TT owners who said that they fit the car perfectly.

john9546

Sorry I missed out on the sale. These are really great. If you ever make new ones let me and the forum know. Mk2 Audi TT owner.

rmicroys

Sorry, I'm not going to make any more of these. If you are interested, any good local CNC shop should be able to make a run of these for less than 25$ each if you get 25 made. Then it's just a matter of selling them all for 45$ each.

I have all the data in a bunch of files, including a google sketchup file to scale, on my server:

http colon //rmicroys.isa-geek.com/photos/AudiR8_JackPad

john9546

Thanks for sharing.