For Sale: AWE Tuning 3.0T S4 B8 S-Flo Intake System
03-11-2012, 10:02 AM
#1
Audi Forum - Posts like an A3
Thread Starter
iTrader: (1)
Join Date: Mar 2011
Location: t.o
Posts: 61
AWE Tuning 3.0T S4 B8 S-Flo Intake System
This is in pristine condition!! The kit retails for about $319USD from AWE.
My bro bought this and installed it once, took it out. Fits 2010 + S4 models
The S-FLO air filter is NEW. Never been used.
Incl Filter, 2 clamps and the hose pipe.
Paypal accepted and can ship if needed.
---------------------------------------------------------------------
he AWE Tuning S-FLO Intake was engineered to improve the 3.0T’s ability to draw in cool air while creating impressive power gains.
"We focused on the components where there was potential for power, as opposed to replacing quality OEM sections. By doing so, AWE Tuning has created an Intake system that truly unlocks Performance: Just big power gains, tasteful aesthetics, and perfect daily drivability.” " remarks AWE Tuning Director of Engineering Chris Dollery.
Highlights of this system:
Max gains: +15 hp and +11 ft lb at the crank at 7000 rpm
Peak gains: +10 hp and +6 ft lb at the crank
Factory airbox is retained for ultimate intake air heat shielding
OE Style locking rib at inlet and outlet of silicone hose
High flow silicone hose replaces restrictive factory tube and Helmholtz Resonator
Significant power gains while retaining desired sound
Utilizes proprietary S-FLO Filter
Available in Black or Red
Aftermarket intakes with open air filters suck in the heat from the engine bay, which can kill power gains generated by a freer flowing filter. By retaining the factory airbox and ducting on the AWE Tuning S-FLO Intake, we are able to provide the needed barrier against the hot engine bay air, while producing a stealth appearance -- all without an audible variance.
We replace the restrictive factory hose with an integrated Helmholtz resonator with the AWE Tuning Nomex® lined, steel wire reinforced silicone hose. The AWE Tuning hose is designed to have optimal flow geometry into, through and out of the tube. A molded lip is integrated where the hose mates to the airbox and throttle body to ensure a proper seal.
The S-FLO Filter
The AWE Tuning S-FLO Intake employs the proprietary S-FLO Filter – the washable, large cone filter that has been independently lab tested to allow 34% more airflow than the factory paper filter. The filter is oiled (as opposed to paper) to help facilitate the more aggressive air flow. The AWE Tuning S-FLO Filter is the largest possible filter that can fit within the airbox. We chose an oiled filter because they, by design, flow more than the paper equivalent.
My bro bought this and installed it once, took it out. Fits 2010 + S4 models
The S-FLO air filter is NEW. Never been used.
Incl Filter, 2 clamps and the hose pipe.
Paypal accepted and can ship if needed.
---------------------------------------------------------------------
he AWE Tuning S-FLO Intake was engineered to improve the 3.0T’s ability to draw in cool air while creating impressive power gains.
"We focused on the components where there was potential for power, as opposed to replacing quality OEM sections. By doing so, AWE Tuning has created an Intake system that truly unlocks Performance: Just big power gains, tasteful aesthetics, and perfect daily drivability.” " remarks AWE Tuning Director of Engineering Chris Dollery.
Highlights of this system:
Max gains: +15 hp and +11 ft lb at the crank at 7000 rpm
Peak gains: +10 hp and +6 ft lb at the crank
Factory airbox is retained for ultimate intake air heat shielding
OE Style locking rib at inlet and outlet of silicone hose
High flow silicone hose replaces restrictive factory tube and Helmholtz Resonator
Significant power gains while retaining desired sound
Utilizes proprietary S-FLO Filter
Available in Black or Red
Aftermarket intakes with open air filters suck in the heat from the engine bay, which can kill power gains generated by a freer flowing filter. By retaining the factory airbox and ducting on the AWE Tuning S-FLO Intake, we are able to provide the needed barrier against the hot engine bay air, while producing a stealth appearance -- all without an audible variance.
We replace the restrictive factory hose with an integrated Helmholtz resonator with the AWE Tuning Nomex® lined, steel wire reinforced silicone hose. The AWE Tuning hose is designed to have optimal flow geometry into, through and out of the tube. A molded lip is integrated where the hose mates to the airbox and throttle body to ensure a proper seal.
The S-FLO Filter
The AWE Tuning S-FLO Intake employs the proprietary S-FLO Filter – the washable, large cone filter that has been independently lab tested to allow 34% more airflow than the factory paper filter. The filter is oiled (as opposed to paper) to help facilitate the more aggressive air flow. The AWE Tuning S-FLO Filter is the largest possible filter that can fit within the airbox. We chose an oiled filter because they, by design, flow more than the paper equivalent.
05-12-2012, 08:07 PM
#9
Audi Forum - Posts like an A1
Join Date: Apr 2012
Location: Ancaster, Ontario
Posts: 6
