Trouble shifting after clutch replacement
10-19-2004, 12:48 AM
#1
Guest
Posts: n/a
Trouble shifting after clutch replacement
Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
2 go in easy, gears 1 and 2 I have to push the stick as far to the side
(left of course) as possible and then it will shift. Is this normal
because the clutch is new or should I go back to the mechanic?
TIA!
cp
2 go in easy, gears 1 and 2 I have to push the stick as far to the side
(left of course) as possible and then it will shift. Is this normal
because the clutch is new or should I go back to the mechanic?
TIA!
cp
10-19-2004, 08:53 AM
#2
Guest
Posts: n/a
Re: Trouble shifting after clutch replacement
cp,
When they took the tranny out to service the clutch, they disturbed the
shift linkage on the top of the transmission - it's a ball and socket
arrangement and (apparently) it's a royal pain to get at with the
transmission in the car. Check the Audifans archives for postings on fixing
the linkage - or take it back to the shop and have them do it - did you have
the rear crankshaft seal replaced when the clutch was done?
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"news.telus.net" <dont@email.me> wrote in message
news:YU1dd.32790$qU.2237@clgrps13...
> Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
> 2 go in easy, gears 1 and 2 I have to push the stick as far to the side
> (left of course) as possible and then it will shift. Is this normal
> because the clutch is new or should I go back to the mechanic?
>
> TIA!
>
> cp
When they took the tranny out to service the clutch, they disturbed the
shift linkage on the top of the transmission - it's a ball and socket
arrangement and (apparently) it's a royal pain to get at with the
transmission in the car. Check the Audifans archives for postings on fixing
the linkage - or take it back to the shop and have them do it - did you have
the rear crankshaft seal replaced when the clutch was done?
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"news.telus.net" <dont@email.me> wrote in message
news:YU1dd.32790$qU.2237@clgrps13...
> Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
> 2 go in easy, gears 1 and 2 I have to push the stick as far to the side
> (left of course) as possible and then it will shift. Is this normal
> because the clutch is new or should I go back to the mechanic?
>
> TIA!
>
> cp
10-19-2004, 08:53 AM
#3
Guest
Posts: n/a
Re: Trouble shifting after clutch replacement
cp,
When they took the tranny out to service the clutch, they disturbed the
shift linkage on the top of the transmission - it's a ball and socket
arrangement and (apparently) it's a royal pain to get at with the
transmission in the car. Check the Audifans archives for postings on fixing
the linkage - or take it back to the shop and have them do it - did you have
the rear crankshaft seal replaced when the clutch was done?
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"news.telus.net" <dont@email.me> wrote in message
news:YU1dd.32790$qU.2237@clgrps13...
> Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
> 2 go in easy, gears 1 and 2 I have to push the stick as far to the side
> (left of course) as possible and then it will shift. Is this normal
> because the clutch is new or should I go back to the mechanic?
>
> TIA!
>
> cp
When they took the tranny out to service the clutch, they disturbed the
shift linkage on the top of the transmission - it's a ball and socket
arrangement and (apparently) it's a royal pain to get at with the
transmission in the car. Check the Audifans archives for postings on fixing
the linkage - or take it back to the shop and have them do it - did you have
the rear crankshaft seal replaced when the clutch was done?
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"news.telus.net" <dont@email.me> wrote in message
news:YU1dd.32790$qU.2237@clgrps13...
> Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
> 2 go in easy, gears 1 and 2 I have to push the stick as far to the side
> (left of course) as possible and then it will shift. Is this normal
> because the clutch is new or should I go back to the mechanic?
>
> TIA!
>
> cp
10-19-2004, 09:52 PM
#4
Guest
Posts: n/a
Re: Trouble shifting after clutch replacement
Hi Steve, thank you for your reply. I'm definitely returning the car to
the mechanic! The seal? Another thing to check, thanks again!
chris
Steve Sears wrote:
> cp,
> When they took the tranny out to service the clutch, they disturbed the
> shift linkage on the top of the transmission - it's a ball and socket
> arrangement and (apparently) it's a royal pain to get at with the
> transmission in the car. Check the Audifans archives for postings on fixing
> the linkage - or take it back to the shop and have them do it - did you have
> the rear crankshaft seal replaced when the clutch was done?
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ
> 1980 Audi 5k
> 1962 and '64 Auto Union DKW Junior deLuxes
> (SPAM Blocker NOTE: Remove SHOES to reply)
>
> "news.telus.net" <dont@email.me> wrote in message
> news:YU1dd.32790$qU.2237@clgrps13...
>
>>Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
>>2 go in easy, gears 1 and 2 I have to push the stick as far to the side
>>(left of course) as possible and then it will shift. Is this normal
>>because the clutch is new or should I go back to the mechanic?
the mechanic! The seal? Another thing to check, thanks again!
chris
Steve Sears wrote:
> cp,
> When they took the tranny out to service the clutch, they disturbed the
> shift linkage on the top of the transmission - it's a ball and socket
> arrangement and (apparently) it's a royal pain to get at with the
> transmission in the car. Check the Audifans archives for postings on fixing
> the linkage - or take it back to the shop and have them do it - did you have
> the rear crankshaft seal replaced when the clutch was done?
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ
> 1980 Audi 5k
> 1962 and '64 Auto Union DKW Junior deLuxes
> (SPAM Blocker NOTE: Remove SHOES to reply)
>
> "news.telus.net" <dont@email.me> wrote in message
> news:YU1dd.32790$qU.2237@clgrps13...
>
>>Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
>>2 go in easy, gears 1 and 2 I have to push the stick as far to the side
>>(left of course) as possible and then it will shift. Is this normal
>>because the clutch is new or should I go back to the mechanic?
10-19-2004, 09:52 PM
#5
Guest
Posts: n/a
Re: Trouble shifting after clutch replacement
Hi Steve, thank you for your reply. I'm definitely returning the car to
the mechanic! The seal? Another thing to check, thanks again!
chris
Steve Sears wrote:
> cp,
> When they took the tranny out to service the clutch, they disturbed the
> shift linkage on the top of the transmission - it's a ball and socket
> arrangement and (apparently) it's a royal pain to get at with the
> transmission in the car. Check the Audifans archives for postings on fixing
> the linkage - or take it back to the shop and have them do it - did you have
> the rear crankshaft seal replaced when the clutch was done?
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ
> 1980 Audi 5k
> 1962 and '64 Auto Union DKW Junior deLuxes
> (SPAM Blocker NOTE: Remove SHOES to reply)
>
> "news.telus.net" <dont@email.me> wrote in message
> news:YU1dd.32790$qU.2237@clgrps13...
>
>>Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
>>2 go in easy, gears 1 and 2 I have to push the stick as far to the side
>>(left of course) as possible and then it will shift. Is this normal
>>because the clutch is new or should I go back to the mechanic?
the mechanic! The seal? Another thing to check, thanks again!
chris
Steve Sears wrote:
> cp,
> When they took the tranny out to service the clutch, they disturbed the
> shift linkage on the top of the transmission - it's a ball and socket
> arrangement and (apparently) it's a royal pain to get at with the
> transmission in the car. Check the Audifans archives for postings on fixing
> the linkage - or take it back to the shop and have them do it - did you have
> the rear crankshaft seal replaced when the clutch was done?
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ
> 1980 Audi 5k
> 1962 and '64 Auto Union DKW Junior deLuxes
> (SPAM Blocker NOTE: Remove SHOES to reply)
>
> "news.telus.net" <dont@email.me> wrote in message
> news:YU1dd.32790$qU.2237@clgrps13...
>
>>Hi, I had the clutch replaced ('86 5000 TQ), all the gears except 1 and
>>2 go in easy, gears 1 and 2 I have to push the stick as far to the side
>>(left of course) as possible and then it will shift. Is this normal
>>because the clutch is new or should I go back to the mechanic?
Thread
Thread Starter
Forum
Replies
Last Post
Codyguthrie39
A4-B5 - (Typ 8D, 1994–2001)
2
07-02-2012 03:57 PM
mack1time
A4-B6 - (Typ 8E/8H, 2001–2005)
13
04-26-2010 09:52 PM
Spider
Audi Mailing List
10
10-08-2003 11:21 AM
Ash Mann
Audi Mailing List
8
10-01-2003 09:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
