Rocker cover studs ( Audi 80 )
#1
Guest
Posts: n/a
Rocker cover studs ( Audi 80 )
Hi All
Got an Audi 80 (91 j) and it has got an oil leak on the rocker cover gasket
(cork btw) Audi have sold me a rubber revised version of this and it has a
set of new studs with it.
My question is "how do i free up the jammed studs"?
5 of the 8 just will not move!!
Any ideas?
Many thanks
Paul
Got an Audi 80 (91 j) and it has got an oil leak on the rocker cover gasket
(cork btw) Audi have sold me a rubber revised version of this and it has a
set of new studs with it.
My question is "how do i free up the jammed studs"?
5 of the 8 just will not move!!
Any ideas?
Many thanks
Paul
#2
Guest
Posts: n/a
Re: Rocker cover studs ( Audi 80 )
You can buy a stud remover or you can just put two nuts on the stud that you
want to remove, tighten them and put a wrench on the bottom nut and turn it
counterclockwise to loosen the stud out of the head
"Paul" <muttsdanglers@REMOVETHISbtinternet.com> wrote in message
news:bk2k9r$l04$1@sparta.btinternet.com...
> Hi All
> Got an Audi 80 (91 j) and it has got an oil leak on the rocker cover
gasket
> (cork btw) Audi have sold me a rubber revised version of this and it has a
> set of new studs with it.
> My question is "how do i free up the jammed studs"?
> 5 of the 8 just will not move!!
>
> Any ideas?
>
> Many thanks
>
> Paul
>
>
want to remove, tighten them and put a wrench on the bottom nut and turn it
counterclockwise to loosen the stud out of the head
"Paul" <muttsdanglers@REMOVETHISbtinternet.com> wrote in message
news:bk2k9r$l04$1@sparta.btinternet.com...
> Hi All
> Got an Audi 80 (91 j) and it has got an oil leak on the rocker cover
gasket
> (cork btw) Audi have sold me a rubber revised version of this and it has a
> set of new studs with it.
> My question is "how do i free up the jammed studs"?
> 5 of the 8 just will not move!!
>
> Any ideas?
>
> Many thanks
>
> Paul
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Goff Deegle
Audi Mailing List
4
09-05-2006 01:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)