Oil Spill During Filter Removal
#1
Guest
Posts: n/a
Oil Spill During Filter Removal
Anyone have some good hints to reduce or prevent oil spills when removing
the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
under the filter, but that is not 100% effective. Also, the oil filter gets
quite messy, and it is a pain to jockey it out past all the hoses. Perhaps I
should be going in from the underside?
Don Borowski
the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
under the filter, but that is not 100% effective. Also, the oil filter gets
quite messy, and it is a pain to jockey it out past all the hoses. Perhaps I
should be going in from the underside?
Don Borowski
#2
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
Don,
I losen the filter with a filter wrench and then put an old coffee can
under it. The filter drops into the can as I unscrew it w/ little mess.
All this can be done from the top.
Bruce
2001.5 A4TQ
Don Borowski wrote:
>Anyone have some good hints to reduce or prevent oil spills when removing
>the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
>under the filter, but that is not 100% effective. Also, the oil filter gets
>quite messy, and it is a pain to jockey it out past all the hoses. Perhaps I
>should be going in from the underside?
>
>Don Borowski
>
>
>
>
I losen the filter with a filter wrench and then put an old coffee can
under it. The filter drops into the can as I unscrew it w/ little mess.
All this can be done from the top.
Bruce
2001.5 A4TQ
Don Borowski wrote:
>Anyone have some good hints to reduce or prevent oil spills when removing
>the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
>under the filter, but that is not 100% effective. Also, the oil filter gets
>quite messy, and it is a pain to jockey it out past all the hoses. Perhaps I
>should be going in from the underside?
>
>Don Borowski
>
>
>
>
#3
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
"B" <bruuster@earthlink.net> wrote in message
news:3FBFF596.7080109@earthlink.net...
> Don,
>
> I losen the filter with a filter wrench and then put an old coffee can
> under it. The filter drops into the can as I unscrew it w/ little mess.
> All this can be done from the top.
>
> Bruce
> 2001.5 A4TQ
>
>
> Don Borowski wrote:
>
> >Anyone have some good hints to reduce or prevent oil spills when removing
> >the oil filter from a 1.8T engine in a 2001 A4? I have placed paper
towels
> >under the filter, but that is not 100% effective. Also, the oil filter
gets
> >quite messy, and it is a pain to jockey it out past all the hoses.
Perhaps I
> >should be going in from the underside?
Wow.
In 20+ years, I've never even heard of someone attempting to change an oil
filter from above.
Guess I should get out more ;o)
(Conventional way is from below, unscrew, tilt, withdraw, tip contents into
same drain tank as where the sump contents went. Most oil [in my experience]
drains downwards. Something to do with a chap named "Newton", I think ;o)
--
Hairy One Kenobi
Disclaimer: the opinions expressed in this opinion do not necessarily
reflect the opinions of the highly-opinionated person expressing the opinion
in the first place. So there!
news:3FBFF596.7080109@earthlink.net...
> Don,
>
> I losen the filter with a filter wrench and then put an old coffee can
> under it. The filter drops into the can as I unscrew it w/ little mess.
> All this can be done from the top.
>
> Bruce
> 2001.5 A4TQ
>
>
> Don Borowski wrote:
>
> >Anyone have some good hints to reduce or prevent oil spills when removing
> >the oil filter from a 1.8T engine in a 2001 A4? I have placed paper
towels
> >under the filter, but that is not 100% effective. Also, the oil filter
gets
> >quite messy, and it is a pain to jockey it out past all the hoses.
Perhaps I
> >should be going in from the underside?
Wow.
In 20+ years, I've never even heard of someone attempting to change an oil
filter from above.
Guess I should get out more ;o)
(Conventional way is from below, unscrew, tilt, withdraw, tip contents into
same drain tank as where the sump contents went. Most oil [in my experience]
drains downwards. Something to do with a chap named "Newton", I think ;o)
--
Hairy One Kenobi
Disclaimer: the opinions expressed in this opinion do not necessarily
reflect the opinions of the highly-opinionated person expressing the opinion
in the first place. So there!
#5
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
B wrote:
> Yes Hairy,
>
> I just remove the 3 screws holding the coolant expansion tank, lift it
> out of the way and I can get my hands down to the filter. It drops into
> the coffee can and I just lift the filter up and out.
>
>
I have access to a lift so I do it from underneath. I use the box from
the new filter to create a "channel" to direct the oil flowing from the
old filter (as it is being removed) into a bucket below the car. Any
oil splash is removed using a couple sprays from a can of brake cleaner
and a rag. The filter is definitely in a very inconvenient location,
even with a lift, as you still have to remove the splash guard below
the engine compartment to get your hands anywhere near it.
Cheers,
C
> Yes Hairy,
>
> I just remove the 3 screws holding the coolant expansion tank, lift it
> out of the way and I can get my hands down to the filter. It drops into
> the coffee can and I just lift the filter up and out.
>
>
I have access to a lift so I do it from underneath. I use the box from
the new filter to create a "channel" to direct the oil flowing from the
old filter (as it is being removed) into a bucket below the car. Any
oil splash is removed using a couple sprays from a can of brake cleaner
and a rag. The filter is definitely in a very inconvenient location,
even with a lift, as you still have to remove the splash guard below
the engine compartment to get your hands anywhere near it.
Cheers,
C
#6
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
No, the easiest way is to get someone else to do it for you
"Don Borowski" <donb@runway.net> wrote in message
news:vrvpl7bkurkg91@corp.supernews.com...
> Anyone have some good hints to reduce or prevent oil spills when removing
> the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
> under the filter, but that is not 100% effective. Also, the oil filter
gets
> quite messy, and it is a pain to jockey it out past all the hoses. Perhaps
I
> should be going in from the underside?
>
> Don Borowski
>
>
"Don Borowski" <donb@runway.net> wrote in message
news:vrvpl7bkurkg91@corp.supernews.com...
> Anyone have some good hints to reduce or prevent oil spills when removing
> the oil filter from a 1.8T engine in a 2001 A4? I have placed paper towels
> under the filter, but that is not 100% effective. Also, the oil filter
gets
> quite messy, and it is a pain to jockey it out past all the hoses. Perhaps
I
> should be going in from the underside?
>
> Don Borowski
>
>
#7
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
Chris Mauritz <ritz@mordor.net> wrote in message news:<0oVvb.12580$Hb.3721769@news4.srv.hcvlny.cv.n et>...
> B wrote:
> > Yes Hairy,
> >
> > I just remove the 3 screws holding the coolant expansion tank, lift it
> > out of the way and I can get my hands down to the filter. It drops into
> > the coffee can and I just lift the filter up and out.
> >
> >
>
> I have access to a lift so I do it from underneath. I use the box from
> the new filter to create a "channel" to direct the oil flowing from the
> old filter (as it is being removed) into a bucket below the car. Any
> oil splash is removed using a couple sprays from a can of brake cleaner
> and a rag. The filter is definitely in a very inconvenient location,
> even with a lift, as you still have to remove the splash guard below
> the engine compartment to get your hands anywhere near it.
I think that most modern cars have this engine undertray. I find that
on both of my Audis, the filter is in a very convenient location to
get at from under the car, that the tray is easy to remove and
re-install (once you have done it a couple of times. The first time
is a pain) and I do all of this with the car on ramps in the garage.
I have even used a jack to put the car's wheel on blocks, such that I
could get under it. No big deal.
Funny, I never have oil spills, nor drips, nor any other kind of mess.
It seems to work just fine collecting the oil in an old wash basin
(the kind one might buy to wash dishes in the sink.)
--
Jonesy
> B wrote:
> > Yes Hairy,
> >
> > I just remove the 3 screws holding the coolant expansion tank, lift it
> > out of the way and I can get my hands down to the filter. It drops into
> > the coffee can and I just lift the filter up and out.
> >
> >
>
> I have access to a lift so I do it from underneath. I use the box from
> the new filter to create a "channel" to direct the oil flowing from the
> old filter (as it is being removed) into a bucket below the car. Any
> oil splash is removed using a couple sprays from a can of brake cleaner
> and a rag. The filter is definitely in a very inconvenient location,
> even with a lift, as you still have to remove the splash guard below
> the engine compartment to get your hands anywhere near it.
I think that most modern cars have this engine undertray. I find that
on both of my Audis, the filter is in a very convenient location to
get at from under the car, that the tray is easy to remove and
re-install (once you have done it a couple of times. The first time
is a pain) and I do all of this with the car on ramps in the garage.
I have even used a jack to put the car's wheel on blocks, such that I
could get under it. No big deal.
Funny, I never have oil spills, nor drips, nor any other kind of mess.
It seems to work just fine collecting the oil in an old wash basin
(the kind one might buy to wash dishes in the sink.)
--
Jonesy
#8
Guest
Posts: n/a
Re: Oil Spill During Filter Removal
Clanger-
Yeah, I did that during the warrantee period. Had to arrange a time to be
without the car. Then they went ahead and lost half of the fasteners holding
the belly pan. They overtorqued the drain plug. I didn't discover all this
until I started doing it myself.
Yeah, it sure is easier to have someone else do it for me, if I don't care
if they screw things up.
Thanks to all the others for the hints. I may try it from below next time,
or move the coolant bottle out of the way.
Don Borowski
"Clanger" <D231@sidfseltd.freeserve.co.uk> wrote in message
news:bpqn4f$okn$1@news8.svr.pol.co.uk...
> No, the easiest way is to get someone else to do it for you
>
>
> "Don Borowski" <donb@runway.net> wrote in message
> news:vrvpl7bkurkg91@corp.supernews.com...
> > Anyone have some good hints to reduce or prevent oil spills when
removing
> > the oil filter from a 1.8T engine in a 2001 A4? I have placed paper
towels
> > under the filter, but that is not 100% effective. Also, the oil filter
> gets
> > quite messy, and it is a pain to jockey it out past all the hoses.
Perhaps
> I
> > should be going in from the underside?
> >
> > Don Borowski
> >
> >
>
>
Yeah, I did that during the warrantee period. Had to arrange a time to be
without the car. Then they went ahead and lost half of the fasteners holding
the belly pan. They overtorqued the drain plug. I didn't discover all this
until I started doing it myself.
Yeah, it sure is easier to have someone else do it for me, if I don't care
if they screw things up.
Thanks to all the others for the hints. I may try it from below next time,
or move the coolant bottle out of the way.
Don Borowski
"Clanger" <D231@sidfseltd.freeserve.co.uk> wrote in message
news:bpqn4f$okn$1@news8.svr.pol.co.uk...
> No, the easiest way is to get someone else to do it for you
>
>
> "Don Borowski" <donb@runway.net> wrote in message
> news:vrvpl7bkurkg91@corp.supernews.com...
> > Anyone have some good hints to reduce or prevent oil spills when
removing
> > the oil filter from a 1.8T engine in a 2001 A4? I have placed paper
towels
> > under the filter, but that is not 100% effective. Also, the oil filter
> gets
> > quite messy, and it is a pain to jockey it out past all the hoses.
Perhaps
> I
> > should be going in from the underside?
> >
> > Don Borowski
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Silverbird
Audi parts for sale & wanted.
2
08-10-2012 12:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)