Dan

I have a 1995 Audi with the 2.8 V6 and 150k. I just had the oil changed a
few days ago, except now I get some lifter ticking noise for about 5 seconds
after I start it. It's cold outside, maybe 10-20 degrees, and was before as
well. I used the same Mobil 1 hi-mi synthetic that I had in it before,
except this time it was 10-30 versus 10w-40 before. Any reasons why it
would all of a sudden start ticking on start up after an oil change?

one out of many daves

Did you use a MANN filter or other good filter?
Why hi-mi oil? And was that 10W-40 also a hi-mi synthetic?

BTW I run plain Mobil 1 synthetic 10W-30 in my '83 engine with 240K+
miles on it.

Or maybe that engine does not like the 10W-30.

Dan wrote:
> I have a 1995 Audi with the 2.8 V6 and 150k. I just had the oil
> changed a few days ago, except now I get some lifter ticking noise for
> about 5 seconds after I start it. It's cold outside, maybe 10-20
> degrees, and was before as well. I used the same Mobil 1 hi-mi
> synthetic that I had in it before, except this time it was 10-30 versus
> 10w-40 before. Any reasons why it would all of a sudden start ticking
> on start up after an oil change?

Dan

It was at a German specialty repair shop I dont know what brand of oil
filter they used. I love the hi-mi synthetic, I went from adding a quart of
oil every 1000 miles to a quart every 5000. Mostly just leaks, the engine
runs like a clock.


"one out of many daves" <NOSPAMvwdoc1@hotmail.comPLEASE> wrote in message
news:gr%8j.31686$JD.17927@newssvr21.news.prodigy.n et...
> Did you use a MANN filter or other good filter?
> Why hi-mi oil? And was that 10W-40 also a hi-mi synthetic?
>
> BTW I run plain Mobil 1 synthetic 10W-30 in my '83 engine with 240K+ miles
> on it.
>
> Or maybe that engine does not like the 10W-30.
>
> Dan wrote:
>> I have a 1995 Audi with the 2.8 V6 and 150k. I just had the oil changed
>> a few days ago, except now I get some lifter ticking noise for about 5
>> seconds after I start it. It's cold outside, maybe 10-20 degrees, and was
>> before as well. I used the same Mobil 1 hi-mi synthetic that I had in it
>> before, except this time it was 10-30 versus 10w-40 before. Any reasons
>> why it would all of a sudden start ticking on start up after an oil
>> change?

Kevin McMurtrie

In article <13m8n5685a1u05f@corp.supernews.com>,
"Dan" <DSABA@COMCASTR.NET> wrote:

> I have a 1995 Audi with the 2.8 V6 and 150k. I just had the oil changed a
> few days ago, except now I get some lifter ticking noise for about 5 seconds
> after I start it. It's cold outside, maybe 10-20 degrees, and was before as
> well. I used the same Mobil 1 hi-mi synthetic that I had in it before,
> except this time it was 10-30 versus 10w-40 before. Any reasons why it
> would all of a sudden start ticking on start up after an oil change?

I've heard that on other cars when the oil filter doesn't have a
backflow valve. I haven't changed the oil filter on my Audi myself yet
(looks like a serious PITA) so I don't know how the backflow mechanism
works on it.

dave AKA vwdoc1

Then ask them about the ticking.
I have had a MANN filter that starting leaking at a seam within 15 minutes
after installation (2nd start of vehicle).
I did not like that, but I guess there can be problems with anything.

Hmmmm maybe I will try that hi-mi synthetic one day!


----- Original Message -----
From: "Dan" <DSABA@COMCASTR.NET>

> It was at a German specialty repair shop I dont know what brand of oil
> filter they used. I love the hi-mi synthetic, I went from adding a quart
> of oil every 1000 miles to a quart every 5000. Mostly just leaks, the
> engine runs like a clock.
>
>
> "one out of many daves" <NOSPAMvwdoc1@hotmail.comPLEASE> wrote in message
> news:gr%8j.31686$JD.17927@newssvr21.news.prodigy.n et...
>> Did you use a MANN filter or other good filter?
>> Why hi-mi oil? And was that 10W-40 also a hi-mi synthetic?
>>
>> BTW I run plain Mobil 1 synthetic 10W-30 in my '83 engine with 240K+
>> miles on it.
>>
>> Or maybe that engine does not like the 10W-30.
>>
>> Dan wrote:
>>> I have a 1995 Audi with the 2.8 V6 and 150k. I just had the oil
>>> changed a few days ago, except now I get some lifter ticking noise for
>>> about 5 seconds after I start it. It's cold outside, maybe 10-20
>>> degrees, and was before as well. I used the same Mobil 1 hi-mi
>>> synthetic that I had in it before, except this time it was 10-30 versus
>>> 10w-40 before. Any reasons why it would all of a sudden start ticking
>>> on start up after an oil change?
>