FIS/computer display stopped showing information: Audi A6 model 2002
#41
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
"daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> <sami.p.heikkinen@poista.elisanet.fi> wrote:
>
>>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
>>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
>>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
>>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
>>>
>>>>I have tested also to select different modes using the button (two way
>>>>switch) at the end of the right stick, but still shows empty.
>>>
>>> Yep. It remains off until you switch it on again.
>>>
>>> Of course only if this is really the cause.
>>>
>>> Wolfgang
>>
>>That was it. Obviously I have accidentally pressed the Reset button at
>>some
>>point of time. I was not aware of the this feature. Root cause:
>>"Misunderstanding by the user"
>
> When I did a stint in customer support, we'd call that an "IO Error".
>
> "Idiot Operator"
In danish "Fejl 40" (error 40).
(hint: the user sits approximately 40 cm´s way ;o))
--
Gio
#42
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
Another IT related "error code" is CODE 18
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
#43
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
Another IT related "error code" is CODE 18
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
#44
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
Another IT related "error code" is CODE 18
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
#45
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
Another IT related "error code" is CODE 18
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
The user sits roughly 18" from the screen...
In article <v32of.14428$p97.5285@fe06.highwinds-media.phx>,
gio@ig.dk.INVALID says...
>
> "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message
> news:e2s0q1h92jv1or2cs51e2iiggl44iaekq1@4ax.com...
> > On Wed, 14 Dec 2005 17:36:38 +0200, "Sami Heikkinen"
> > <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >
> >>"Wolfgang Pawlinetz" <w.pawlinetz@a1.net> wrote in message
> >>news:e9eup15n95t9rjti88ltf4dqdfv888a6g8@4ax.com. ..
> >>> On Tue, 13 Dec 2005 22:57:35 +0200, "Sami Heikkinen"
> >>> <sami.p.heikkinen@poista.elisanet.fi> wrote:
> >>>
> >>>>I have tested also to select different modes using the button (two way
> >>>>switch) at the end of the right stick, but still shows empty.
> >>>
> >>> Yep. It remains off until you switch it on again.
> >>>
> >>> Of course only if this is really the cause.
> >>>
> >>> Wolfgang
> >>
> >>That was it. Obviously I have accidentally pressed the Reset button at
> >>some
> >>point of time. I was not aware of the this feature. Root cause:
> >>"Misunderstanding by the user"
> >
> > When I did a stint in customer support, we'd call that an "IO Error".
> >
> > "Idiot Operator"
>
> In danish "Fejl 40" (error 40).
>
> (hint: the user sits approximately 40 cm´s way ;o))
>
>
>
#46
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
"Chris" wrote
> Another IT related "error code" is CODE 18
> The user sits roughly 18" from the screen...
Another IT-related acronym is PEBKAC (problem exists between keyboard and
chair).
Pete
#47
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
"Chris" wrote
> Another IT related "error code" is CODE 18
> The user sits roughly 18" from the screen...
Another IT-related acronym is PEBKAC (problem exists between keyboard and
chair).
Pete
#48
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
"Chris" wrote
> Another IT related "error code" is CODE 18
> The user sits roughly 18" from the screen...
Another IT-related acronym is PEBKAC (problem exists between keyboard and
chair).
Pete
#49
Guest
Posts: n/a
Re: SOLVED: FIS/computer display stopped showing information: Audi A6 model 2002
"Chris" wrote
> Another IT related "error code" is CODE 18
> The user sits roughly 18" from the screen...
Another IT-related acronym is PEBKAC (problem exists between keyboard and
chair).
Pete