Belt or Chains
#2
Guest
Posts: n/a
Re: Belt or Chains
I BELIEVE that the Audi V8's used belts - but I also believe that the
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
#3
Guest
Posts: n/a
Re: Belt or Chains
I BELIEVE that the Audi V8's used belts - but I also believe that the
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
#4
Guest
Posts: n/a
Re: Belt or Chains
I BELIEVE that the Audi V8's used belts - but I also believe that the
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
B6 S4 V8 uses a chain in the rear of the engine - to make it shorter to
fit into the smaller engine bay. Not sure if that change was also made
to the other V8 engined models.
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
#5
Guest
Posts: n/a
Re: Belt or Chains
After adding that, I went to Audiworld and confirmed that the V8 does
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
#6
Guest
Posts: n/a
Re: Belt or Chains
After adding that, I went to Audiworld and confirmed that the V8 does
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
#7
Guest
Posts: n/a
Re: Belt or Chains
After adding that, I went to Audiworld and confirmed that the V8 does
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
indeed use a belt - look here -
http://www.audiworld.com/model/historical.html
and here is the info on the V8 for MY 2000 -
DOHC, belt driven, hydraulic lifters / 3 path variable intake
manifold roller camshaft followers, variable intake camshaft timing
Dan D
'04 A4 1.8Tq MT-6
Central NJ USA
Thread
Thread Starter
Forum
Replies
Last Post
guhbuhjuh
A4-B6 - (Typ 8E/8H, 2001–2005)
6
01-07-2013 10:20 PM
zuppa7
A4-B5 - (Typ 8D, 1994–2001)
4
04-30-2006 03:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)