AUDI A4 AVANT 2.4 SE 6 CYL
#11
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
I recently changed timing belt on an 2,6 V6 on 97' A6 and used the special
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
#12
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
I recently changed timing belt on an 2,6 V6 on 97' A6 and used the special
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
#13
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
I recently changed timing belt on an 2,6 V6 on 97' A6 and used the special
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
tools purchased from blauparts.
Saves a lot of hazle, although most of the work is connected to
dismantling plastic parts to get to the actual belt.
http://www.blauparts.com/Featured_Au..._A6_Sale.shtml
Be careful when applying force to the bolts on the new waterpump as they
are close to the limit at 20Nm.. BDTD..
You can even buy manuals at the site..
I use a German languaged So wird's gemacht by Delius Klasing Verlag..Found
it at Amazon.de
I guess you may have to remove the radiator on your model... Which is a
lot more work than on the 97' A6.. The 98' A6 though is a diferent story..
You even have to remove the front fender...
regards
ottar t
På Tue, 19 Apr 2005 01:45:40 GMT, skrev Mike Whiteman <mickdw@msn.com>:
> You need a Bentley manual. Paper one is easier to use.
>
> About 5 hours work VW/Audi recommends some special tools but they are not
> necessary if you mark all the pulleys.
>
> Make sure you replace the water pump as this is weak point on the V6. The
> timing belt also turns the water pump.
>
>
> "ALAN MATTHEWS via CarKB.com" <forum@nospam.CarKB.com> wrote in message
> news:9b30e6d8b60247d18b6d4355b36a8f36@CarKB.com...
>> I WANT TO CHANGE THE CAMBELT ON MY CAR WHICH IS COMING UP FOR ITS SECOND
>> ONE AT 155,000 MILES. I AM AN EXPERIENCED MECHANIC/PROFESSIONAL ENGINEER
>> SO
>> CAN "DO THE JOB" BUT WOULD LIKE TO KNOW WHAT TO I HAVE TO DO BEFORE I
>> START.
>>
>> WHERE CAN I FIND THE NECESSARY INFORMATION - THE HAYNES MANUAL ONLY
>> DEALS
>> WITH 4 CYL MODELS AND MY LOCAL AUDI DEALER IS UNDERSTANDABLY NOT VERY
>> HELPFUL !!!
>>
>> CAN I GET HOLD OF THE INFORMATION ON THE NET ANYWHERE OR BUY A CD OF THE
>> WORKSHOP MANUAL PLEASE ???
>>
>> ALAN MATTHEWS
>
>
--
Sendt med M2 - Operas revolusjonerende e-postprogram:
http://www.opera.com/m2/
#14
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
Thanks for the information - but where do I get and how do I specify the
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
#15
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
Thanks for the information - but where do I get and how do I specify the
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
#16
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
Thanks for the information - but where do I get and how do I specify the
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
correct manual for my car.
Have tried BENTLY MANUALS etc on the net without much success - also Amazon.
Alan Matthews
--
Message posted via http://www.carkb.com
#17
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
sorry about the loud capitals - i even hand-write in capitals most of the
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
#18
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
sorry about the loud capitals - i even hand-write in capitals most of the
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
#19
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
sorry about the loud capitals - i even hand-write in capitals most of the
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
time because my "joined up writing " is a bit doctor like and hard to read.
also i'm a one finger typist and have problems if i have to keep
remembering about the case shift key
--
Message posted via http://www.carkb.com
#20
Guest
Posts: n/a
Re: AUDI A4 AVANT 2.4 SE 6 CYL
Thanks, this provided some good information, but I am hoping I can short-
cut some of the procedures eg not removing the cam sprockets from the
camshafts and getting the timing correct by dabs of paint on the old cam
belt and sprockets, - then transferring the paint marks from the old belt
to new before reassembly. I have done this successfully many times before
on other vehicles.
Also have to renew the alternator bearings, water pump, belt
tensioner,serpentine belt etc. This hardware will cost about £120 from
German and Swedish, plus about 5 hours of my work as a 69 year old I think !
!!
Alan Matthews
--
Message posted via http://www.carkb.com
cut some of the procedures eg not removing the cam sprockets from the
camshafts and getting the timing correct by dabs of paint on the old cam
belt and sprockets, - then transferring the paint marks from the old belt
to new before reassembly. I have done this successfully many times before
on other vehicles.
Also have to renew the alternator bearings, water pump, belt
tensioner,serpentine belt etc. This hardware will cost about £120 from
German and Swedish, plus about 5 hours of my work as a 69 year old I think !
!!
Alan Matthews
--
Message posted via http://www.carkb.com