Audi 100 5cyl cold start problem
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Well the fuel pump is running fine with plenty of pressure, the only
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Well the fuel pump is running fine with plenty of pressure, the only
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Well the fuel pump is running fine with plenty of pressure, the only
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
problem is the cold start injector not getting any power when cranking
and Im currently under the impression that it is a temp sensor, bad
ground or bad wiring, the computer has been replaced with no change.
the car does not 'start' on ether it just fires. once the car is
running it runs fine until you let it sit for 4 hours or so, when it
goes cold. Anyway im working on the problem and will reply once it is
fixed, now there is another issue i need to sort, see the new post.
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Check the multi function temperture sensor. They have three or four wires
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Check the multi function temperture sensor. They have three or four wires
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
Guest
Posts: n/a
Re: Audi 100 5cyl cold start problem
Check the multi function temperture sensor. They have three or four wires
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
located near the upper radiator hose on the block. It is common for them to fail
and cause these problems. New ones will have only three wires. These can also
cause the temperature gage to not work.
sealdogfish wrote:
> Well the fuel pump is running fine with plenty of pressure, the only
> problem is the cold start injector not getting any power when cranking
> and Im currently under the impression that it is a temp sensor, bad
> ground or bad wiring, the computer has been replaced with no change.
> the car does not 'start' on ether it just fires. once the car is
> running it runs fine until you let it sit for 4 hours or so, when it
> goes cold. Anyway im working on the problem and will reply once it is
> fixed, now there is another issue i need to sort, see the new post.
>
Thread
Thread Starter
Forum
Replies
Last Post
Kjell Arne Jacobsen
Audi Mailing List
0
Dec 4, 2003 02:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
