A4 Temprature Gauge Sender
#2
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
A4 2.6? ABC? If you meant 2.8 AFC V6, then the Engine Coolant Temp
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
#3
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
A4 2.6? ABC? If you meant 2.8 AFC V6, then the Engine Coolant Temp
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
#4
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
A4 2.6? ABC? If you meant 2.8 AFC V6, then the Engine Coolant Temp
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
sensor is located on the coolant line behind the cylinder head on the
passenger side. It is a four pin sensor.
Best of Luck
Chuck
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:41ba2cc9$0$23020$cc9e4d1f@news.dial.pipex.com ...
> Hi Guys,
>
> Dose anyone know where the engine water temp gauge sender unit is on a
> 1996 A4 2.6 - ABC v6 engine? I have the top engine cover off but can't see
> anything that looks like it,
>
> Steve.
>
>
#5
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
In message <Krqud.3519$lZ6.545@trnddc02>
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
#6
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
In message <Krqud.3519$lZ6.545@trnddc02>
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
#7
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
In message <Krqud.3519$lZ6.545@trnddc02>
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
"Chuck" <cefreeland@verizon.net> wrote:
> A4 2.6? ABC? If you meant 2.8 AFC V6
I don't think so - the 12 valve 2.8 was never offered in the UK A4.
We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
--
Peter Bell (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')
#8
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
"Peter Bell" <peter@invalid.org.uk> wrote in message
news:d654561b4d.peter@iyonix.earley.fourcom.com...
> In message <Krqud.3519$lZ6.545@trnddc02>
> "Chuck" <cefreeland@verizon.net> wrote:
>
>> A4 2.6? ABC? If you meant 2.8 AFC V6
>
> I don't think so - the 12 valve 2.8 was never offered in the UK A4.
>
> We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
>
> --
> Peter Bell (Note Spamtrap - To reply, replace 'invalid' with
> 'bellfamily')
Hi, Its definitively a 2.6 v6 12v engine, engine suffix ABC, the 2.8 12v v6
was suffix AAH I think, I just cant see anything that looks remotely like
the temp sender, the temp gauge sometimes works sometimes does not, was
going to try a new sender as a starting point,
Steve.
#9
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
"Peter Bell" <peter@invalid.org.uk> wrote in message
news:d654561b4d.peter@iyonix.earley.fourcom.com...
> In message <Krqud.3519$lZ6.545@trnddc02>
> "Chuck" <cefreeland@verizon.net> wrote:
>
>> A4 2.6? ABC? If you meant 2.8 AFC V6
>
> I don't think so - the 12 valve 2.8 was never offered in the UK A4.
>
> We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
>
> --
> Peter Bell (Note Spamtrap - To reply, replace 'invalid' with
> 'bellfamily')
Hi, Its definitively a 2.6 v6 12v engine, engine suffix ABC, the 2.8 12v v6
was suffix AAH I think, I just cant see anything that looks remotely like
the temp sender, the temp gauge sometimes works sometimes does not, was
going to try a new sender as a starting point,
Steve.
#10
Guest
Posts: n/a
Re: A4 Temprature Gauge Sender
"Peter Bell" <peter@invalid.org.uk> wrote in message
news:d654561b4d.peter@iyonix.earley.fourcom.com...
> In message <Krqud.3519$lZ6.545@trnddc02>
> "Chuck" <cefreeland@verizon.net> wrote:
>
>> A4 2.6? ABC? If you meant 2.8 AFC V6
>
> I don't think so - the 12 valve 2.8 was never offered in the UK A4.
>
> We only had the 2.6 until 1997 models arrived with the 30 valve 2.8.
>
> --
> Peter Bell (Note Spamtrap - To reply, replace 'invalid' with
> 'bellfamily')
Hi, Its definitively a 2.6 v6 12v engine, engine suffix ABC, the 2.8 12v v6
was suffix AAH I think, I just cant see anything that looks remotely like
the temp sender, the temp gauge sometimes works sometimes does not, was
going to try a new sender as a starting point,
Steve.