Ray L

Sometimes the front indicators on both sides play up by winking at
twice the normal rate on the dash. The manual states that this
indicates a fault. When it happens the rear and side indicators show
but the front doesn't.

Does this mean the fault is with the front indicator?

Sometimes it is o/s and sometimes n/s but never together. When I press
the hazard light switch that works ok.

The only way I've found to clear the fault is to remove the offending
flasher bulb and then replace. Not rocket science but it works
although its a pain having to remove the air intake to get to the o/s
all the time.

Is it anything to do with the relay?

Is there a loose connection although it worries that botyh sides can
be affected, highly coincidental in my opinion?

Is this a particular problem with the A6?

Any suggestions on how to sort permanently?

Thanks

Ray
England

JPF

The front sockets frequently melt at the contacts.


On 2 Sep 2003 05:26:23 -0700, ray@sunshine1.fsnet.co.uk (Ray L) wrote:

>Sometimes the.........................

Stu Hedith

I have a '99A6 and had a similar problem to what you describe. I found
that one of the contacts looked as though it was not making good contact
and there must have been some arcing taking place. The metal was
disfigured and heavily oxidized. I cleaned it up (both terminals) and
it worked fine. It was very difficult to reach the terminal in the
housing, but I managed to get to it with sandpaper and a screwdriver.
Hope this helps.

Stu
'99 A6 Avant

Ray L wrote:
> Sometimes the front indicators on both sides play up by winking at
> twice the normal rate on the dash. The manual states that this
> indicates a fault. When it happens the rear and side indicators show
> but the front doesn't.
>
> Does this mean the fault is with the front indicator?
>
> Sometimes it is o/s and sometimes n/s but never together. When I press
> the hazard light switch that works ok.
>
> The only way I've found to clear the fault is to remove the offending
> flasher bulb and then replace. Not rocket science but it works
> although its a pain having to remove the air intake to get to the o/s
> all the time.
>
> Is it anything to do with the relay?
>
> Is there a loose connection although it worries that botyh sides can
> be affected, highly coincidental in my opinion?
>
> Is this a particular problem with the A6?
>
> Any suggestions on how to sort permanently?
>
> Thanks
>
> Ray
> England