1975 Audi 100 transmission
Guest
Posts: n/a
1975 Audi 100 transmission
We are trying to remove the old transmission but the bellhousing hits the
welded crossbar behind the motor and there is not enough give to force it
by. Is there an easy way to get the transmission out? We have tried
turning the tranny every way possible - no luck. Appreciate any info.
welded crossbar behind the motor and there is not enough give to force it
by. Is there an easy way to get the transmission out? We have tried
turning the tranny every way possible - no luck. Appreciate any info.
Guest
Posts: n/a
Re: 1975 Audi 100 transmission
Bruce,
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
Guest
Posts: n/a
Re: 1975 Audi 100 transmission
Bruce,
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
Guest
Posts: n/a
Re: 1975 Audi 100 transmission
Bruce,
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
You might try asking the folks on the Audi C1 group on Yahoo. Chances are,
using an engine crane, you'd take the engine and transmission together out
of the top after removing the hood, and then remove the transmission.
Cheers!
Steve Sears
1987 Audi 5kTQ
1980 Audi 5k
1962 and '64 Auto Union DKW Junior deLuxes
(SPAM Blocker NOTE: Remove SHOES to reply)
"bampebbles" <bruce_king@adelphia.net> wrote in message
news:8ec8e94b6013002c1cbaa78df489bf13@localhost.ta lkaboutautos.com...
> We are trying to remove the old transmission but the bellhousing hits the
> welded crossbar behind the motor and there is not enough give to force it
> by. Is there an easy way to get the transmission out? We have tried
> turning the tranny every way possible - no luck. Appreciate any info.
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
