A6, S6, RS6 DIY for Audi A6/S6/RS6

Replacing Camshaft Sensor - 99 2.8L

Old 11-16-2011, 11:58 AM
  #1  
Audi Forum - Posts like an A1
Thread Starter
 
Join Date: Feb 2008
Location: Calgary
Posts: 21
The Stig is on a distinguished road
Exclamation Replacing Camshaft Sensor - 99 2.8L

Hey all,

After replacing the battery, ignition coil, spark plugs, wires and a crankshaft position sensor due to my car not starting after throwing some misfire codes I am now getting a camshaft position sensor bank 1 code. Car still won't start.

Does anyone know which side of the engine is bank 1 and are there any other codes I should be anticipating after changing this?
The Stig is offline  
Old 06-27-2012, 01:09 PM
  #2  
Audi Forum - Posts like an A1
 
Join Date: Jun 2012
Location: oshawa
Posts: 1
austinmann is on a distinguished road
Angry Re: Replacing Camshaft Sensor - 99 2.8L

Originally Posted by The Stig View Post
Hey all,

After replacing the battery, ignition coil, spark plugs, wires and a crankshaft position sensor due to my car not starting after throwing some misfire codes I am now getting a camshaft position sensor bank 1 code. Car still won't start.

Does anyone know which side of the engine is bank 1 and are there any other codes I should be anticipating after changing this?
i have the same problem plus a lot more

Tuesday,26,June,2012,15:09:38:12778
VCDS Version: Release 11.11.3
Data version: 20120401



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 4B - Audi A6 C5
Scan: 01 02 03 06 08 15 16 17 18 22 34 35 36 37 45 55 56 57 65 67
75 76 77

Mileage: 293760km/182534miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 078-907-551-AHA.lbl
Part No: 4D0 907 551 AH
Component: 2.8L V6/5V MOTR AT D01
Coding: 06252
Shop #: WSC 02324
VCID: 6CDDFD6A1C90D69

15 Faults Found:
18010 - Power Supply Terminal 30
P1602 - 35-10 - Voltage too Low - Intermittent
17967 - Throttle Body (J33
P1559 - 35-10 - Fault in basic settings - Intermittent
17927 - Camshaft Adjustment; Bank 1
P1519 - 35-00 - Malfunction
17606 - Oxygen (Lambda) Sensor Heater Circuit: B1 S2
P1198 - 35-00 - Electrical Malfunction
17607 - Oxygen (Lambda) Sensor Heater Circuit: B2 S2
P1199 - 35-00 - Electrical Malfunction
16542 - Oxygen (Lambda) Sensor B2 S2
P0158 - 35-10 - Signal too High - Intermittent
16684 - Random/Multiple Cylinder Misfire Detected
P0300 - 35-00 -
16685 - Cylinder 1
P0301 - 35-00 - Misfire Detected
16687 - Cylinder 3
P0303 - 35-00 - Misfire Detected
16686 - Cylinder 2
P0302 - 35-00 - Misfire Detected
16684 - Random/Multiple Cylinder Misfire Detected
P0300 - 35-00 -
16685 - Cylinder 1
P0301 - 35-00 - Misfire Detected
16687 - Cylinder 3
P0303 - 35-00 - Misfire Detected
16686 - Cylinder 2
P0302 - 35-00 - Misfire Detected
17746 - Camshaft Position Sensor (G40)
P1338 - 35-00 - Open or Short to Plus
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 01V-927-156.lbl
Part No: 4B0 927 156 G
Component: AG5 01V 2.8l5V USA 8509
Coding: 00000
Shop #: WSC 00000
VCID: 2B5F3E76D91E111

1 Fault Found:
00526 - Brake Light Switch-F
27-00 - Implausible Signal

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-614-111-EDS.lbl
Part No: 8E0 614 111 M
Component: ABS/EDS 5.3 QUATTRO D31
Shop #: BB 24302
VCID: 2855C17AC8E83A9

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 4B0-820-043-MY1.lbl
Part No: 4B0 820 043 G
Component: A6-Klimavollautomat D55
Coding: 00160
Shop #: WSC 02324
VCID: 1E39E7A29AACF49

1 Fault Found:
00792 - A/C Pressure Switch (F129)
31-10 - Open or Short to Ground - Intermittent

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 4B0-959-655-AI7.lbl
Part No: 4B0 959 655 D
Component: Airbag 7 Audi 0301
Coding: 00106
Shop #: WSC 02314
VCID: 31632C1EFB327B1

1 Fault Found:
01213 - Belt Tensioner Igniter; Rear Middle (N19
32-10 - Resistance too High - Intermittent

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 4B0-919-xxx-17.lbl
Part No: 4B0 919 930 BX
Component: C5-KOMBIINSTR. VDO D11
Coding: 07262
Shop #: WSC 08136
VCID: 7F073A267DE65D1

No fault code found.

-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 4B0-962-258.lbl
Part No: 4B0 962 258 C
Component: Central Lock/Alarm D30
Coding: 15885
Shop #: WSC 02324
VCID: 2953C47ED3E2031

6 Faults Found:
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01374 - Alarm triggered by Terminal 15
35-00 - -
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01368 - Alarm triggered by Luggage Compartment Switch
35-00 - -
00955 - Key 1
09-10 - Adaptation Limit Surpassed - Intermittent
01573 - Alarm triggered by Door Contact Switch; Left Rear
35-00 - -

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr Labels: None
Part No: 4B0 959 760 A
Component: Sitzmemory D05
VCID: 2B5F3E76D91E111

1 Fault Found:
01454 - Driver's Seat Fore/Aft and Height Adjust Switch (E61); Back
28-10 - Short to Plus - Intermittent

-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.lbl
Part No: 4B0 951 173
Component: Innenraumueberw. D02
Coding: 00001
Shop #: WSC 00136
VCID: E0C5195A6058029

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio Labels: 8D0-035-1xx-56.lbl
Part No: 4B0 035 186
Component: Radio D01
Coding: 00017
Shop #: WSC 02324
VCID: DDBB20AE572A2F1

No fault code found.

End ---------------------------------------------------------------------
austinmann is offline  
Old 06-27-2012, 01:26 PM
  #3  
Audi Forum - Posts like an A4
 
BrandonS's Avatar
 
Join Date: Dec 2011
Location: Whitby
Posts: 110
BrandonS is on a distinguished road
Default Re: Replacing Camshaft Sensor - 99 2.8L

I'm 99 % sure that bank 1 is the drivers side. I had the cam position sensor code as well, i replaced it and still had the code. I know now it has to do with the wiring and not the sensor, so just know that if you replace the sensor it may not cure the issue. FYI I have an A6 2.8 as well.
BrandonS is offline  
Old 11-28-2018, 12:17 PM
  #4  
Audi Forum - Posts like an A1
 
Join Date: Nov 2018
Location: Ohio
Posts: 1
DaddyRandy17 is on a distinguished road
Default Re: Replacing Camshaft Sensor - 99 2.8L

Depends if it is the DOHC. Bank 1 on the DOHC is passengers side in the front. Have the same issue. Brand new plugs, wires, coil pack, and CMP on bank 1. Still getting P1338 with cylinders 1-3 misfires. Am at a loss.
DaddyRandy17 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Alexgaspari
A6-C6 - (Typ 4F, 20042011)
1
04-04-2013 07:20 AM
audibot
A4-B7 - (Typ 8E/8H, 20052008)
8
03-25-2013 09:47 PM
fdease
A6-C5 - (Typ 4B, 19972004)
4
01-21-2010 08:08 PM
pablo_ottawa
A4-B6 - (Typ 8E/8H, 20012005)
1
05-02-2009 07:33 AM
jakemandue
A6-C5 - (Typ 4B, 19972004)
2
03-03-2009 10:10 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Replacing Camshaft Sensor - 99 2.8L


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.