ESP light ON, audi A3 2.0T 2007
#1
ESP light ON, audi A3 2.0T 2007
Hi,
last day, the ESP warning light is staying on. nothing to do with the button on the dash
so Vag Com diag :
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Control Module Part Number: 1K0 907 379 AC HW: 1K0 907 379 AC
Component and/or Version: ESP FRONT MK60 0101
Software Coding: 0021122
1 Fault Found:
01435 - Brake Pressure Sensor 1 (G201)
012 - Electrical Fault in Circuit
verification of brake light switch :
VAG -> ENGINE -> MEAS. BLOCK -> GROUP 066
in second "box" I have 1000, no feet on the pedal, (the 1 is for the cruise control)
"clutch" pedal is pressed :01100
brake pedal is pressed : 01011
clutch + brake pedal are pressed : 01111
is this ok in your case ???? my brake light work fine!!!
Verificaiton of Brake Pressure Sensor 1 (G201):
Prerequisites:
> System voltage at least 12.0 V.
[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 005
[Go!]
field 1, the value is 214.66 bars normaly it must be between -8.0 and +8.0 bar.
I need other suggestion to test before going to the dealer.
I had read that this is a commun issu of the ABS brake system in VW and Audi because now the Brake Pressure Sensor 1 (G201) is integrated in the ABS module
Please Help !
last day, the ESP warning light is staying on. nothing to do with the button on the dash
so Vag Com diag :
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Control Module Part Number: 1K0 907 379 AC HW: 1K0 907 379 AC
Component and/or Version: ESP FRONT MK60 0101
Software Coding: 0021122
1 Fault Found:
01435 - Brake Pressure Sensor 1 (G201)
012 - Electrical Fault in Circuit
verification of brake light switch :
VAG -> ENGINE -> MEAS. BLOCK -> GROUP 066
in second "box" I have 1000, no feet on the pedal, (the 1 is for the cruise control)
"clutch" pedal is pressed :01100
brake pedal is pressed : 01011
clutch + brake pedal are pressed : 01111
is this ok in your case ???? my brake light work fine!!!
Verificaiton of Brake Pressure Sensor 1 (G201):
Prerequisites:
> System voltage at least 12.0 V.
[Select]
[03 - Brake Electronics]
[Measuring Blocks - 08]
Group 005
[Go!]
field 1, the value is 214.66 bars normaly it must be between -8.0 and +8.0 bar.
I need other suggestion to test before going to the dealer.
I had read that this is a commun issu of the ABS brake system in VW and Audi because now the Brake Pressure Sensor 1 (G201) is integrated in the ABS module
Please Help !
Thread
Thread Starter
Forum
Replies
Last Post
neothe1
A4-B6 - (Typ 8E/8H, 2001–2005)
10
09-23-2016 07:33 PM
Cundy
A4-B6 - (Typ 8E/8H, 2001–2005)
12
09-02-2010 07:37 AM
SH4GGY
A4-B6 - (Typ 8E/8H, 2001–2005)
2
03-09-2010 03:55 PM
skid00skid00@yahoo.com
Audi Mailing List
0
08-06-2007 11:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)