Oxygen sensor for a Chevy = $20
Oxygen sensor for an Audi = $150 !!!!!
They look the same. Most sensors have a Zirconia element and
operate between 0 and 1 volt.
Does anyone know of a cross-reference between Audi parts and
the more reasonable priced parts available at the local auto parts store?

 

You can also buy a generic Bosch sensor for about $40 and crimp the wires to the
Audi plug. Solder can be a problem with the heat in the area.

Frank wrote:
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

You can also buy a generic Bosch sensor for about $40 and crimp the wires to the
Audi plug. Solder can be a problem with the heat in the area.

Frank wrote:
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

From:
http://www.boschusa.com/AutoParts/FAQs/OxygenSensors/

"Q. Except for the connector assembly, aren't all oxygen sensors basically
the same?

A. NO. There are five fundamentally different types of oxygen sensors:
unheated thimble, heated thimble, planar, wide-band and titania. Within each
sensor type, sensors vary in the design of the ceramic element, heater
element and protection tube design, all of which affect sensor operation."

I guess I have an Heated Thimble on my 83 Audi 4000S, a Heated Thimble on my
91 Passat, and a Titania on my 88 Cherokee engine. Now I only need two
more to complete my 5! lol

BTW the website above has a link for instructions on how to install a
universal 02 sensor and also a Vehicle Part Finder link to find the univeral
02 sensor

later,
dave



"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

From:
http://www.boschusa.com/AutoParts/FAQs/OxygenSensors/

"Q. Except for the connector assembly, aren't all oxygen sensors basically
the same?

A. NO. There are five fundamentally different types of oxygen sensors:
unheated thimble, heated thimble, planar, wide-band and titania. Within each
sensor type, sensors vary in the design of the ceramic element, heater
element and protection tube design, all of which affect sensor operation."

I guess I have an Heated Thimble on my 83 Audi 4000S, a Heated Thimble on my
91 Passat, and a Titania on my 88 Cherokee engine. Now I only need two
more to complete my 5! lol

BTW the website above has a link for instructions on how to install a
universal 02 sensor and also a Vehicle Part Finder link to find the univeral
02 sensor

later,
dave



"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

I just recently replaced my O2 sensor. 96 S6 sensor $150 canadian. O2 sensor
from 86 Mustang $45 canadian. Just had to snip off connector and splice
wires.

Tony
96 S6

"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

I just recently replaced my O2 sensor. 96 S6 sensor $150 canadian. O2 sensor
from 86 Mustang $45 canadian. Just had to snip off connector and splice
wires.

Tony
96 S6

"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

Try to find an equivalent VW part. For an A4, go to a VW dealer and buy
part number 06A 906 262 Q, it's about $25 and plugs right in.

"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>

 

Try to find an equivalent VW part. For an A4, go to a VW dealer and buy
part number 06A 906 262 Q, it's about $25 and plugs right in.

"Frank" <f_rubino@prodigy.net> wrote in message
news:VRQed.112$Aq6.51@newssvr16.news.prodigy.com.. .
> Oxygen sensor for a Chevy = $20
> Oxygen sensor for an Audi = $150 !!!!!
> They look the same. Most sensors have a Zirconia element and
> operate between 0 and 1 volt.
> Does anyone know of a cross-reference between Audi parts and
> the more reasonable priced parts available at the local auto parts store?
>
>
>