My glove box is ****ed up a little bit..
when you move the handle to open it..only 1 tab slides in (left side) while the tab on the right doesnt move at all...anyone fix one of these and know the ins and outs?
THANKS

 

I had the exact same thing.
What I did was remove the panel on the right side of the glove box so I could get at the pin that was stuck in the hole holding the glove box closed. I stuck a screwdriver in the hole from outside the glove box and the glove box popped open. Then I covered the hole that the pin would normally snap into when the glove box is closed. So now the left pin alone is holding the glove box closed. You could probably disassemble the lock assembly and crazy glue the broken part but it works fine with one pin.
;o)
Bob K