Wiper spindle
Hi Group,
Today I over tightened the nut with the spindle and it snapped, now the nut is with the top bit came off so I can't drive my car under this typical weather! Just wonder if I can buy the spindle assembly on its own, and can anyone tell me roughly how much would be the damage, please? Or any chance I can fix it, I tried the Unibond metal glue, and it didn't work. Any suggestions welcomed. Many thanks, ~Chris |
Re: Wiper spindle
On Mon, 10 May 2004 00:27:07 +0100, "Chris" <chrisling@nospam.hotmail.com>
wrote: >Hi Group, > >Today I over tightened the nut with the spindle and it snapped, now the nut >is with the top bit came off so I can't drive my car under this typical >weather! Just wonder if I can buy the spindle assembly on its own, and can >anyone tell me roughly how much would be the damage, please? > >Or any chance I can fix it, I tried the Unibond metal glue, and it didn't >work. > >Any suggestions welcomed. What are we, clairvoyant? Make/model/year if you actually want any help.... |
Re: Wiper spindle
--"Chris" <chrisling@nospam.hotmail.com> wrote in message news:c7meo9$pkc$1@newsg2.svr.pol.co.uk... > Hi Group, > > Today I over tightened the nut with the spindle and it snapped, now the nut > is with the top bit came off so I can't drive my car under this typical > weather! Just wonder if I can buy the spindle assembly on its own, and can > anyone tell me roughly how much would be the damage, please? > > Or any chance I can fix it, I tried the Unibond metal glue, and it didn't > work. > > Any suggestions welcomed. > > > Many thanks, > > > ~Chris > From what I read -snapping the bolt, glue....- I can only recommend you to the dealer. Ron |
Re: Wiper spindle
"Chris" <chrisling@nospam.hotmail.com> wrote in message news:c7meo9$pkc$1@newsg2.svr.pol.co.uk... > Hi Group, > > Today I over tightened the nut with the spindle and it snapped, now the nut > is with the top bit came off so I can't drive my car under this typical > weather! Just wonder if I can buy the spindle assembly on its own, and can > anyone tell me roughly how much would be the damage, please? > > Or any chance I can fix it, I tried the Unibond metal glue, and it didn't > work. > > Any suggestions welcomed. > You could try euro car parts or GSF but the most lightly place is going to be a main dealer for a relatively new car or a scrap yard (Volks-Apart maybe) for a slightly older one. Is it one of the fronts or the rear one that you snapped? You may need the entire wiper linkage depending on the car and exactly what snapped. The final suggestion would be to go a bit easier from now on with a spanner. |
Re: Wiper spindle
Thanks for all your advices, I phoned the dealer today they said they got
the parts for around £65 quid. ~Chris "Depresion" <blank@128.0.0.1> wrote in message news:3uJnc.32$xd2.15@newsfe1-gui.server.ntli.net... > > "Chris" <chrisling@nospam.hotmail.com> wrote in message > news:c7meo9$pkc$1@newsg2.svr.pol.co.uk... > > Hi Group, > > > > Today I over tightened the nut with the spindle and it snapped, now the nut > > is with the top bit came off so I can't drive my car under this typical > > weather! Just wonder if I can buy the spindle assembly on its own, and can > > anyone tell me roughly how much would be the damage, please? > > > > Or any chance I can fix it, I tried the Unibond metal glue, and it didn't > > work. > > > > Any suggestions welcomed. > > > > You could try euro car parts or GSF but the most lightly place is going to be a > main dealer for a relatively new car or a scrap yard (Volks-Apart maybe) for a > slightly older one. Is it one of the fronts or the rear one that you snapped? > You may need the entire wiper linkage depending on the car and exactly what > snapped. The final suggestion would be to go a bit easier from now on with a > spanner. > > |
Re: Wiper spindle
Sorry mate,
The car is to old that I'm embarrased to tell, it's an 1988 Audi 80 anyway, I know it is not a VW, but it is using the same bosch setup. Cheers, Chris "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message news:95nt905tl6di8770felf1th738jacb67nc@4ax.com... > On Mon, 10 May 2004 00:27:07 +0100, "Chris" <chrisling@nospam.hotmail.com> > wrote: > > >Hi Group, > > > >Today I over tightened the nut with the spindle and it snapped, now the nut > >is with the top bit came off so I can't drive my car under this typical > >weather! Just wonder if I can buy the spindle assembly on its own, and can > >anyone tell me roughly how much would be the damage, please? > > > >Or any chance I can fix it, I tried the Unibond metal glue, and it didn't > >work. > > > >Any suggestions welcomed. > > What are we, clairvoyant? > > Make/model/year if you actually want any help.... |
Re: Wiper spindle
Chris,
What's so old about an '88? My whole fleet is older than that. Cheers! Steve Sears 1987 Audi 5kTQ 1980 Audi 5k 1962 and '64 Auto Union DKW Junior deLuxes (SPAM Blocker NOTE: Remove SHOES to reply) "Chris" <chrisling@nospam.hotmail.com> wrote in message news:c7onjl$h4o$1@newsg2.svr.pol.co.uk... > Sorry mate, > > The car is to old that I'm embarrased to tell, it's an 1988 Audi 80 anyway, > I know it is not a VW, but it is using the same bosch setup. > > Cheers, > > Chris > "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message > news:95nt905tl6di8770felf1th738jacb67nc@4ax.com... > > On Mon, 10 May 2004 00:27:07 +0100, "Chris" <chrisling@nospam.hotmail.com> > > wrote: > > > > >Hi Group, > > > > > >Today I over tightened the nut with the spindle and it snapped, now the > nut > > >is with the top bit came off so I can't drive my car under this typical > > >weather! Just wonder if I can buy the spindle assembly on its own, and > can > > >anyone tell me roughly how much would be the damage, please? > > > > > >Or any chance I can fix it, I tried the Unibond metal glue, and it didn't > > >work. > > > > > >Any suggestions welcomed. > > > > What are we, clairvoyant? > > > > Make/model/year if you actually want any help.... > > |
Re: Wiper spindle
The embarrassment actually come from:
a) only got one wiper on at the moment; b) funny rattling noise due to a cow boy who don a bogus job on the water pump; c) let's face it, my '88 Audi is 16 years very old, and I'm being a bit of a pikey not to change car, in fact I just cannot afford to. ~Chris "Steve Sears" <steve.sears@SHOESsoil-mat.on.ca> wrote in message news:eYRnc.9135$dr1.253616@news20.bellglobal.com.. . > Chris, > What's so old about an '88? My whole fleet is older than that. > Cheers! > Steve Sears > 1987 Audi 5kTQ > 1980 Audi 5k > 1962 and '64 Auto Union DKW Junior deLuxes > (SPAM Blocker NOTE: Remove SHOES to reply) > > "Chris" <chrisling@nospam.hotmail.com> wrote in message > news:c7onjl$h4o$1@newsg2.svr.pol.co.uk... > > Sorry mate, > > > > The car is to old that I'm embarrased to tell, it's an 1988 Audi 80 > anyway, > > I know it is not a VW, but it is using the same bosch setup. > > > > Cheers, > > > > Chris > > "daytripper" <day_trippr@REMOVEyahoo.com> wrote in message > > news:95nt905tl6di8770felf1th738jacb67nc@4ax.com... > > > On Mon, 10 May 2004 00:27:07 +0100, "Chris" > <chrisling@nospam.hotmail.com> > > > wrote: > > > > > > >Hi Group, > > > > > > > >Today I over tightened the nut with the spindle and it snapped, now the > > nut > > > >is with the top bit came off so I can't drive my car under this typical > > > >weather! Just wonder if I can buy the spindle assembly on its own, and > > can > > > >anyone tell me roughly how much would be the damage, please? > > > > > > > >Or any chance I can fix it, I tried the Unibond metal glue, and it > didn't > > > >work. > > > > > > > >Any suggestions welcomed. > > > > > > What are we, clairvoyant? > > > > > > Make/model/year if you actually want any help.... > > > > > > |
All times are GMT -5. The time now is 06:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands