Wheel Bearing Noise ? Audi 100
07-13-2005, 02:36 PM
#1
Guest
Posts: n/a
Wheel Bearing Noise ? Audi 100
I have a '91 Audi 100 non-Q 4 spd automatic
Over the last 3 - 4 months I've noticed a sound as though I'm driving with
snow tires on (which I am not). The car has around 145,00 miles on it. The
sound seems to be related to wheel speed and it's not really loud like I've
read others describe a bearing to be like. I do have a torn outer CV joint
boot and I'm waiting for it to fail to change it. I can't really feel any
slop in the bearing when I jack it up and pull on the wheel. Anyone have any
ideas if this sounds like either a CV joint or wheel bearing? Any other
ideas?
THANKS!
Steve
Over the last 3 - 4 months I've noticed a sound as though I'm driving with
snow tires on (which I am not). The car has around 145,00 miles on it. The
sound seems to be related to wheel speed and it's not really loud like I've
read others describe a bearing to be like. I do have a torn outer CV joint
boot and I'm waiting for it to fail to change it. I can't really feel any
slop in the bearing when I jack it up and pull on the wheel. Anyone have any
ideas if this sounds like either a CV joint or wheel bearing? Any other
ideas?
THANKS!
Steve
07-13-2005, 03:12 PM
#2
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
The message <63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com>
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
07-13-2005, 03:12 PM
#3
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
The message <63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com>
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
07-13-2005, 03:12 PM
#4
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
The message <63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com>
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
07-13-2005, 03:12 PM
#5
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
The message <63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com>
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
from "~ Elektraman ~" <smarty@mn.rr.com> contains these words:
> Over the last 3 - 4 months I've noticed a sound as though I'm driving with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like I've
> read others describe a bearing to be like.
Bearings often start quiet.
As for the CV jont - why wait for an expensive part to fail just 'cos
you CBA to replace the boot for a few quid.
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
07-13-2005, 03:48 PM
#6
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
Steve,
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
07-13-2005, 03:48 PM
#7
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
Steve,
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
07-13-2005, 03:48 PM
#8
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
Steve,
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
07-13-2005, 03:48 PM
#9
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
Steve,
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
The noise (generally a "low growling") indeed sounds like a bearing -
failing CV's are more aptly described as "clicking".
You want to go to an empty road or parking lot, drive at a maneuvering
speed, and then crank the wheel - the bearing will be noisiest when more
heavily loaded on the outside of a turn.
If you find a torn boot, take it to a shop and have them really wash the
heck out of the CV, then relube and put on a new boot. Chances are it will
fail when you least need/afford it to.
Cheers!
Steve Sears
1987 Audi 5kTQ - put off changing the clutch master cylinder for a
year.....it totally failed this morning as I left for work
1980 Audi 5k - put off brake service and blew a line on the way to a local
Audi meeting
1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
(SPAM Blocker NOTE: Remove SHOES to reply)
"~ Elektraman ~" <smarty@mn.rr.com> wrote in message
news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
> I have a '91 Audi 100 non-Q 4 spd automatic
>
> Over the last 3 - 4 months I've noticed a sound as though I'm driving
with
> snow tires on (which I am not). The car has around 145,00 miles on it. The
> sound seems to be related to wheel speed and it's not really loud like
I've
> read others describe a bearing to be like. I do have a torn outer CV joint
> boot and I'm waiting for it to fail to change it. I can't really feel any
> slop in the bearing when I jack it up and pull on the wheel. Anyone have
any
> ideas if this sounds like either a CV joint or wheel bearing? Any other
> ideas?
>
> THANKS!
> Steve
>
>
07-13-2005, 10:12 PM
#10
Guest
Posts: n/a
Re: Wheel Bearing Noise ? Audi 100
Steve, Thanks for you help. I have a rebuilt half shaft and planned on
switching it out soon. With the noise I was hearing from the wheel I thought
I would do both jobs at the same time. I needed to confirm my suspicion
before ordering the wheel bearings. No ticking sound from the CV joint yet
but I 'll have the new one in before that happens.
THANKS!
Steve
"Steve Sears" <steve.sears@SHOESsoil-mat.on.ca> wrote in message
news:%9fBe.4728$6e3.500621@news20.bellglobal.com.. .
> Steve,
> The noise (generally a "low growling") indeed sounds like a bearing -
> failing CV's are more aptly described as "clicking".
> You want to go to an empty road or parking lot, drive at a maneuvering
> speed, and then crank the wheel - the bearing will be noisiest when more
> heavily loaded on the outside of a turn.
> If you find a torn boot, take it to a shop and have them really wash the
> heck out of the CV, then relube and put on a new boot. Chances are it
> will
> fail when you least need/afford it to.
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ - put off changing the clutch master cylinder for a
> year.....it totally failed this morning as I left for work
> 1980 Audi 5k - put off brake service and blew a line on the way to a local
> Audi meeting
> 1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
> (SPAM Blocker NOTE: Remove SHOES to reply)
> "~ Elektraman ~" <smarty@mn.rr.com> wrote in message
> news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
>> I have a '91 Audi 100 non-Q 4 spd automatic
>>
>> Over the last 3 - 4 months I've noticed a sound as though I'm driving
> with
>> snow tires on (which I am not). The car has around 145,00 miles on it.
>> The
>> sound seems to be related to wheel speed and it's not really loud like
> I've
>> read others describe a bearing to be like. I do have a torn outer CV
>> joint
>> boot and I'm waiting for it to fail to change it. I can't really feel any
>> slop in the bearing when I jack it up and pull on the wheel. Anyone have
> any
>> ideas if this sounds like either a CV joint or wheel bearing? Any other
>> ideas?
>>
>> THANKS!
>> Steve
>>
>>
>
>
switching it out soon. With the noise I was hearing from the wheel I thought
I would do both jobs at the same time. I needed to confirm my suspicion
before ordering the wheel bearings. No ticking sound from the CV joint yet
but I 'll have the new one in before that happens.
THANKS!
Steve
"Steve Sears" <steve.sears@SHOESsoil-mat.on.ca> wrote in message
news:%9fBe.4728$6e3.500621@news20.bellglobal.com.. .
> Steve,
> The noise (generally a "low growling") indeed sounds like a bearing -
> failing CV's are more aptly described as "clicking".
> You want to go to an empty road or parking lot, drive at a maneuvering
> speed, and then crank the wheel - the bearing will be noisiest when more
> heavily loaded on the outside of a turn.
> If you find a torn boot, take it to a shop and have them really wash the
> heck out of the CV, then relube and put on a new boot. Chances are it
> will
> fail when you least need/afford it to.
> Cheers!
> Steve Sears
> 1987 Audi 5kTQ - put off changing the clutch master cylinder for a
> year.....it totally failed this morning as I left for work
> 1980 Audi 5k - put off brake service and blew a line on the way to a local
> Audi meeting
> 1962 and '64 Auto Union DKW Junior deLuxes - too old put stuff off.......
> (SPAM Blocker NOTE: Remove SHOES to reply)
> "~ Elektraman ~" <smarty@mn.rr.com> wrote in message
> news:63eBe.3834$Rx4.1077@tornado.rdc-kc.rr.com...
>> I have a '91 Audi 100 non-Q 4 spd automatic
>>
>> Over the last 3 - 4 months I've noticed a sound as though I'm driving
> with
>> snow tires on (which I am not). The car has around 145,00 miles on it.
>> The
>> sound seems to be related to wheel speed and it's not really loud like
> I've
>> read others describe a bearing to be like. I do have a torn outer CV
>> joint
>> boot and I'm waiting for it to fail to change it. I can't really feel any
>> slop in the bearing when I jack it up and pull on the wheel. Anyone have
> any
>> ideas if this sounds like either a CV joint or wheel bearing? Any other
>> ideas?
>>
>> THANKS!
>> Steve
>>
>>
>
>
