Rear calipers on A6 Quattro
Guest
Posts: n/a
Rear calipers on A6 Quattro
I'm replacing the rear pads on the above vehicle. Right rear was changed
effortlessly other than having to make a tool to retract the caliper. On
the left one I've trid to retract it hundreds of revolutions plus using a
large c clamp. I assume somethings frozen inside. Tiome to buy a new
caliper?
Also can anyone tell me where the brake pressue regulator is on this car,
a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
opinion)says its on the left trapizodial arm. I've looked all over the
left and right without seeing it. Perhaps its only on somr models.
Enlightenment please.
Roger
effortlessly other than having to make a tool to retract the caliper. On
the left one I've trid to retract it hundreds of revolutions plus using a
large c clamp. I assume somethings frozen inside. Tiome to buy a new
caliper?
Also can anyone tell me where the brake pressue regulator is on this car,
a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
opinion)says its on the left trapizodial arm. I've looked all over the
left and right without seeing it. Perhaps its only on somr models.
Enlightenment please.
Roger
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
"ramjet44" <tbaroger@aol.com> wrote in message
news:d3c1bb2555af3876ee64c0d2746e8d8d@localhost.ta lkaboutautos.com...
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
>
Regulator is electronic most probably.\
Calipers is turn and push, only turning doesn't do the trick.
Ronald
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
"ramjet44" <tbaroger@aol.com> wrote in message
news:d3c1bb2555af3876ee64c0d2746e8d8d@localhost.ta lkaboutautos.com...
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
>
Regulator is electronic most probably.\
Calipers is turn and push, only turning doesn't do the trick.
Ronald
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
"ramjet44" <tbaroger@aol.com> wrote in message
news:d3c1bb2555af3876ee64c0d2746e8d8d@localhost.ta lkaboutautos.com...
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
>
Regulator is electronic most probably.\
Calipers is turn and push, only turning doesn't do the trick.
Ronald
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
"ramjet44" <tbaroger@aol.com> wrote in message
news:d3c1bb2555af3876ee64c0d2746e8d8d@localhost.ta lkaboutautos.com...
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
>
Regulator is electronic most probably.\
Calipers is turn and push, only turning doesn't do the trick.
Ronald
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
In article
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
In article
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
In article
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
Guest
Posts: n/a
Re: Rear calipers on A6 Quattro
In article
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
<d3c1bb2555af3876ee64c0d2746e8d8d@localhost.talkab outautos.com>,
"ramjet44" <tbaroger@aol.com> wrote:
> I'm replacing the rear pads on the above vehicle. Right rear was changed
> effortlessly other than having to make a tool to retract the caliper. On
> the left one I've trid to retract it hundreds of revolutions plus using a
> large c clamp. I assume somethings frozen inside. Tiome to buy a new
> caliper?
>
> Also can anyone tell me where the brake pressue regulator is on this car,
> a Quattro wagon 1996. The shop manual (CD by Bentley Publising. POS in my
> opinion)says its on the left trapizodial arm. I've looked all over the
> left and right without seeing it. Perhaps its only on somr models.
> Enlightenment please.
>
> Roger
For the caliper, it is possible that the piston has moved so far that it
is no longer engaged to the threaded piece. If you have not destroyed
the threads with the C-clamp, the secret is turning with constant
pressure until it reengages.
Tom
Thread
Thread Starter
Forum
Replies
Last Post
sburns
A4-B6 - (Typ 8E/8H, 2001–2005)
0
Jun 17, 2014 07:10 PM
Renboy
Audi parts for sale & wanted.
0
Dec 9, 2011 08:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
