Re: 1992 Audi 100 Audio Questions
 

Hi there,

Two things to get power supply ignition and ground you need a test lamp,
this is easy to purchase in any hardware store.

When you´ve done that and to develop into speakers system just take a 1,5
battery and try wire by wire. One wire in + and try the rest of them on -
you´ll see that whwn you match the couple loud-speaker will sound bump like.
It won´t break i assure you I professionally work in it..

Regards.

"TonyJ" <tonyjNOSPAM@NOSPAMvisi.com> escribió en el mensaje
news:3f60b1b1$0$173$a1866201@newsreader.visi.com.. .
> If this is like the Bose systems in the type 44s it will not be that
> easy because the speakers have their own amps and the wiring is too
> small to handle the signal to non-amped speakers.
>
> You may want to check the threads at AudiWorld.com and ask a few others.
>
> If you call the dealer with the VIN and the serial number on the side of
> the radio they can look up the security code.
>
> Tony
> '91 100Q 5spd
>
> Vladimir Pasitchnyk wrote:
> > Hello all,
> > I recently purchased a 1992 Audi 100. I really like the car, but I need
to
> > put in a simple new audio system, because the stock non-bose gamma unit
is
> > not even turning on and i dont have the code. I have 2 questions.
> >
> > 1. Is there some easy wiring diagram on the web maybe to help with
> > connecting the new headunit? (the previous owners totally screwed up the
> > wiring in the back of the stock receiver)
> >
> > 2. Is it difficult to install larger speakers (6x9 ?) in the back than
the
> > stock 5"? how about the front (larger than 4" ?)
> >
> >
>