Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I
was driving home last night. Performance (acceleration) seems "soft" - noise is still occuring. |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I
was driving home last night. Performance (acceleration) seems "soft" - noise is still occuring. |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I
was driving home last night. Performance (acceleration) seems "soft" - noise is still occuring. |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
My 1.8TQM with APR 1 bar chip had another issue due to the wast gate actuator on
the K03 Turbo failing. When that happens you loose boost >> loss of power :-( It is typical to hear a rattling in mid range engine RPM. I wouldn't call the sound a buzzing but more of a high pitched rattle. You can test this by looking beside the engine and above the turbo to see a shiny rod running parallel to the length of the engine. It is quite difficult to see or reach but can be done (when engine is cool). If you can reach it try to move it with a stick to see if it is loose. If it is this may be your problem. The K03 turbos have this happen quite often at 60 - 100 K. Fix is to either replace the turbo or the just the waste gate assy can be found for around $200. Labor will be three or four hours. DIY is possible but a bit challenging. If this is your problem, you could also think of it as an opportunity to justify a K04 / chip upgrade for more smiles. CDN_THNK_TNK wrote: > Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I > was driving home last night. Performance (acceleration) seems "soft" - > noise is still occuring. > |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
My 1.8TQM with APR 1 bar chip had another issue due to the wast gate actuator on
the K03 Turbo failing. When that happens you loose boost >> loss of power :-( It is typical to hear a rattling in mid range engine RPM. I wouldn't call the sound a buzzing but more of a high pitched rattle. You can test this by looking beside the engine and above the turbo to see a shiny rod running parallel to the length of the engine. It is quite difficult to see or reach but can be done (when engine is cool). If you can reach it try to move it with a stick to see if it is loose. If it is this may be your problem. The K03 turbos have this happen quite often at 60 - 100 K. Fix is to either replace the turbo or the just the waste gate assy can be found for around $200. Labor will be three or four hours. DIY is possible but a bit challenging. If this is your problem, you could also think of it as an opportunity to justify a K04 / chip upgrade for more smiles. CDN_THNK_TNK wrote: > Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I > was driving home last night. Performance (acceleration) seems "soft" - > noise is still occuring. > |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
My 1.8TQM with APR 1 bar chip had another issue due to the wast gate actuator on
the K03 Turbo failing. When that happens you loose boost >> loss of power :-( It is typical to hear a rattling in mid range engine RPM. I wouldn't call the sound a buzzing but more of a high pitched rattle. You can test this by looking beside the engine and above the turbo to see a shiny rod running parallel to the length of the engine. It is quite difficult to see or reach but can be done (when engine is cool). If you can reach it try to move it with a stick to see if it is loose. If it is this may be your problem. The K03 turbos have this happen quite often at 60 - 100 K. Fix is to either replace the turbo or the just the waste gate assy can be found for around $200. Labor will be three or four hours. DIY is possible but a bit challenging. If this is your problem, you could also think of it as an opportunity to justify a K04 / chip upgrade for more smiles. CDN_THNK_TNK wrote: > Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I > was driving home last night. Performance (acceleration) seems "soft" - > noise is still occuring. > |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
My 1.8TQM with APR 1 bar chip had another issue due to the wast gate actuator on
the K03 Turbo failing. When that happens you loose boost >> loss of power :-( It is typical to hear a rattling in mid range engine RPM. I wouldn't call the sound a buzzing but more of a high pitched rattle. You can test this by looking beside the engine and above the turbo to see a shiny rod running parallel to the length of the engine. It is quite difficult to see or reach but can be done (when engine is cool). If you can reach it try to move it with a stick to see if it is loose. If it is this may be your problem. The K03 turbos have this happen quite often at 60 - 100 K. Fix is to either replace the turbo or the just the waste gate assy can be found for around $200. Labor will be three or four hours. DIY is possible but a bit challenging. If this is your problem, you could also think of it as an opportunity to justify a K04 / chip upgrade for more smiles. CDN_THNK_TNK wrote: > Thanks Tony. I am also puzzled. Incidentally, MIL illuminated as I > was driving home last night. Performance (acceleration) seems "soft" - > noise is still occuring. > |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony,
I am bringing it in tonight. I will have them scan the ECU (I think that is what it is referred to) to get the code (since the MIL is illuminated there should be a problem code associated with this). I will also mention checking the Waste Gate Actuator. Incidentally, I have never worked on cars (other than a 1980 Chevy Citation) so a lot of the terms that are used are a little foreign to me. Thanks for the tip. Cheers |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony,
I am bringing it in tonight. I will have them scan the ECU (I think that is what it is referred to) to get the code (since the MIL is illuminated there should be a problem code associated with this). I will also mention checking the Waste Gate Actuator. Incidentally, I have never worked on cars (other than a 1980 Chevy Citation) so a lot of the terms that are used are a little foreign to me. Thanks for the tip. Cheers |
Re: New Noise - Engine noise while in Drive - '02 1.8T Quattro
Thanks Tony,
I am bringing it in tonight. I will have them scan the ECU (I think that is what it is referred to) to get the code (since the MIL is illuminated there should be a problem code associated with this). I will also mention checking the Waste Gate Actuator. Incidentally, I have never worked on cars (other than a 1980 Chevy Citation) so a lot of the terms that are used are a little foreign to me. Thanks for the tip. Cheers |
All times are GMT -5. The time now is 01:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands