Nokia car kit for Audi A4
#1
Guest
Posts: n/a
Nokia car kit for Audi A4
I've just got a second hand CARK126 car kit as well as holder and external
antenna, but no install instructions. I'd like to try installing it myself
or should I take it to an installer - they want about $AUS200.....?
Anybody any tips on the wiring and where to place it?
antenna, but no install instructions. I'd like to try installing it myself
or should I take it to an installer - they want about $AUS200.....?
Anybody any tips on the wiring and where to place it?
#2
Guest
Posts: n/a
Re: Nokia car kit for Audi A4
It should be available from Nokia.
"Bear" <who@where.com> wrote in message
news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> I've just got a second hand CARK126 car kit as well as holder and external
> antenna, but no install instructions. I'd like to try installing it
myself
> or should I take it to an installer - they want about $AUS200.....?
>
> Anybody any tips on the wiring and where to place it?
>
>
"Bear" <who@where.com> wrote in message
news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> I've just got a second hand CARK126 car kit as well as holder and external
> antenna, but no install instructions. I'd like to try installing it
myself
> or should I take it to an installer - they want about $AUS200.....?
>
> Anybody any tips on the wiring and where to place it?
>
>
#3
Guest
Posts: n/a
Re: Nokia car kit for Audi A4
Easy. At your own risk of course, follow these:
Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
is a good source!
Black cable to the negative/ground connection. Battery again, or a handy
earth.
That'll get it operational with constant power to the cradle.
IF you want the goodies, like the cradle only being powered when the
ignition is on, radio muting or an auto car-phone antenna, do these as well:
Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
vehicle ignition key.
Yellow cable - used for automatic car radio muting (XCRM) and is connected
to car radio. No idea where on the radio tho!
Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" - used
to trigger a relay for a motorised antenna for the phone, if you use one.
The instructions specifically say to use a relay.
As to placement - I fitted mine (into an old 80) by removing the passenger
dash pocket and attaching the control box to the heater duct. There should
be a bracket with the box that allows you to position the box somewhere with
a screw, but I just used cable-ties for speed.
Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
across the vehicle under the dash. Fiddly, but straightforward as long as
you are double jointed and don't mind grovelling under the dash. Protect the
cable as appropriate. Mic is also good on by the centre mirror, but more
hassle to lead the cable.
Cradle on the centre consol or dash as you prefer.
Of course, with a modern car you'll have an airbag in the left side which
might restrict access to the under dash area. But if you want to risk
fiddling with explosive devices which could kill you, that's your decision.
Is your life worth 200 bucks?? Your choice.
Finally - you'll need an antenna - the manual warns about all that microwave
energy bouncing around inside the car and suggests it could interfere with
vehicle electrical systems as well as your health. I used a dual band
self-adhesive antenna that mounts on the w/screen and took the cable down
behind the dash from there to the box. The phone will work without a vehicle
antenna. Again, your choice.
Anyway, best of luck, its relatively easy, notwithstanding the caveat
above - these instructions straight from a HF CARK-91 install guide and iirc
there might be similar on the web somewhere - Google will find it.
All the plugs / fittings etc are self-explanatory in that they will only fit
the relevant sockets on the box anyway.
Have fun but stay safe! Mike.
(I'm NOT an expert in these things, just a reasonably competent amateur
mechanic, so you follow this at your own risk!! Don't blame me if it all
goes wrong.)
JPB357 <jpb357@jyifan.net> wrote in message
news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> It should be available from Nokia.
>
>
> "Bear" <who@where.com> wrote in message
> news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > I've just got a second hand CARK126 car kit as well as holder and
external
> > antenna, but no install instructions. I'd like to try installing it
> myself
> > or should I take it to an installer - they want about $AUS200.....?
> >
> > Anybody any tips on the wiring and where to place it?
> >
> >
>
>
>
Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
is a good source!
Black cable to the negative/ground connection. Battery again, or a handy
earth.
That'll get it operational with constant power to the cradle.
IF you want the goodies, like the cradle only being powered when the
ignition is on, radio muting or an auto car-phone antenna, do these as well:
Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
vehicle ignition key.
Yellow cable - used for automatic car radio muting (XCRM) and is connected
to car radio. No idea where on the radio tho!
Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" - used
to trigger a relay for a motorised antenna for the phone, if you use one.
The instructions specifically say to use a relay.
As to placement - I fitted mine (into an old 80) by removing the passenger
dash pocket and attaching the control box to the heater duct. There should
be a bracket with the box that allows you to position the box somewhere with
a screw, but I just used cable-ties for speed.
Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
across the vehicle under the dash. Fiddly, but straightforward as long as
you are double jointed and don't mind grovelling under the dash. Protect the
cable as appropriate. Mic is also good on by the centre mirror, but more
hassle to lead the cable.
Cradle on the centre consol or dash as you prefer.
Of course, with a modern car you'll have an airbag in the left side which
might restrict access to the under dash area. But if you want to risk
fiddling with explosive devices which could kill you, that's your decision.
Is your life worth 200 bucks?? Your choice.
Finally - you'll need an antenna - the manual warns about all that microwave
energy bouncing around inside the car and suggests it could interfere with
vehicle electrical systems as well as your health. I used a dual band
self-adhesive antenna that mounts on the w/screen and took the cable down
behind the dash from there to the box. The phone will work without a vehicle
antenna. Again, your choice.
Anyway, best of luck, its relatively easy, notwithstanding the caveat
above - these instructions straight from a HF CARK-91 install guide and iirc
there might be similar on the web somewhere - Google will find it.
All the plugs / fittings etc are self-explanatory in that they will only fit
the relevant sockets on the box anyway.
Have fun but stay safe! Mike.
(I'm NOT an expert in these things, just a reasonably competent amateur
mechanic, so you follow this at your own risk!! Don't blame me if it all
goes wrong.)
JPB357 <jpb357@jyifan.net> wrote in message
news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> It should be available from Nokia.
>
>
> "Bear" <who@where.com> wrote in message
> news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > I've just got a second hand CARK126 car kit as well as holder and
external
> > antenna, but no install instructions. I'd like to try installing it
> myself
> > or should I take it to an installer - they want about $AUS200.....?
> >
> > Anybody any tips on the wiring and where to place it?
> >
> >
>
>
>
#4
Guest
Posts: n/a
Re: Nokia car kit for Audi A4
Thanks for the pointers......
"Mike Buckley" <mike@nochance.com> wrote in message
news:c8g3s8$c5p$1@hercules.btinternet.com...
> Easy. At your own risk of course, follow these:
>
> Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
> is a good source!
> Black cable to the negative/ground connection. Battery again, or a handy
> earth.
>
> That'll get it operational with constant power to the cradle.
> IF you want the goodies, like the cradle only being powered when the
> ignition is on, radio muting or an auto car-phone antenna, do these as
well:
>
> Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
> vehicle ignition key.
> Yellow cable - used for automatic car radio muting (XCRM) and is connected
> to car radio. No idea where on the radio tho!
> Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" -
used
> to trigger a relay for a motorised antenna for the phone, if you use one.
> The instructions specifically say to use a relay.
>
> As to placement - I fitted mine (into an old 80) by removing the passenger
> dash pocket and attaching the control box to the heater duct. There should
> be a bracket with the box that allows you to position the box somewhere
with
> a screw, but I just used cable-ties for speed.
>
> Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
> across the vehicle under the dash. Fiddly, but straightforward as long as
> you are double jointed and don't mind grovelling under the dash. Protect
the
> cable as appropriate. Mic is also good on by the centre mirror, but more
> hassle to lead the cable.
>
> Cradle on the centre consol or dash as you prefer.
>
> Of course, with a modern car you'll have an airbag in the left side which
> might restrict access to the under dash area. But if you want to risk
> fiddling with explosive devices which could kill you, that's your
decision.
> Is your life worth 200 bucks?? Your choice.
>
> Finally - you'll need an antenna - the manual warns about all that
microwave
> energy bouncing around inside the car and suggests it could interfere with
> vehicle electrical systems as well as your health. I used a dual band
> self-adhesive antenna that mounts on the w/screen and took the cable down
> behind the dash from there to the box. The phone will work without a
vehicle
> antenna. Again, your choice.
>
> Anyway, best of luck, its relatively easy, notwithstanding the caveat
> above - these instructions straight from a HF CARK-91 install guide and
iirc
> there might be similar on the web somewhere - Google will find it.
>
> All the plugs / fittings etc are self-explanatory in that they will only
fit
> the relevant sockets on the box anyway.
>
> Have fun but stay safe! Mike.
>
> (I'm NOT an expert in these things, just a reasonably competent amateur
> mechanic, so you follow this at your own risk!! Don't blame me if it all
> goes wrong.)
>
>
> JPB357 <jpb357@jyifan.net> wrote in message
> news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> > It should be available from Nokia.
> >
> >
> > "Bear" <who@where.com> wrote in message
> > news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > > I've just got a second hand CARK126 car kit as well as holder and
> external
> > > antenna, but no install instructions. I'd like to try installing it
> > myself
> > > or should I take it to an installer - they want about $AUS200.....?
> > >
> > > Anybody any tips on the wiring and where to place it?
> > >
> > >
> >
> >
> >
>
>
"Mike Buckley" <mike@nochance.com> wrote in message
news:c8g3s8$c5p$1@hercules.btinternet.com...
> Easy. At your own risk of course, follow these:
>
> Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
> is a good source!
> Black cable to the negative/ground connection. Battery again, or a handy
> earth.
>
> That'll get it operational with constant power to the cradle.
> IF you want the goodies, like the cradle only being powered when the
> ignition is on, radio muting or an auto car-phone antenna, do these as
well:
>
> Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
> vehicle ignition key.
> Yellow cable - used for automatic car radio muting (XCRM) and is connected
> to car radio. No idea where on the radio tho!
> Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" -
used
> to trigger a relay for a motorised antenna for the phone, if you use one.
> The instructions specifically say to use a relay.
>
> As to placement - I fitted mine (into an old 80) by removing the passenger
> dash pocket and attaching the control box to the heater duct. There should
> be a bracket with the box that allows you to position the box somewhere
with
> a screw, but I just used cable-ties for speed.
>
> Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
> across the vehicle under the dash. Fiddly, but straightforward as long as
> you are double jointed and don't mind grovelling under the dash. Protect
the
> cable as appropriate. Mic is also good on by the centre mirror, but more
> hassle to lead the cable.
>
> Cradle on the centre consol or dash as you prefer.
>
> Of course, with a modern car you'll have an airbag in the left side which
> might restrict access to the under dash area. But if you want to risk
> fiddling with explosive devices which could kill you, that's your
decision.
> Is your life worth 200 bucks?? Your choice.
>
> Finally - you'll need an antenna - the manual warns about all that
microwave
> energy bouncing around inside the car and suggests it could interfere with
> vehicle electrical systems as well as your health. I used a dual band
> self-adhesive antenna that mounts on the w/screen and took the cable down
> behind the dash from there to the box. The phone will work without a
vehicle
> antenna. Again, your choice.
>
> Anyway, best of luck, its relatively easy, notwithstanding the caveat
> above - these instructions straight from a HF CARK-91 install guide and
iirc
> there might be similar on the web somewhere - Google will find it.
>
> All the plugs / fittings etc are self-explanatory in that they will only
fit
> the relevant sockets on the box anyway.
>
> Have fun but stay safe! Mike.
>
> (I'm NOT an expert in these things, just a reasonably competent amateur
> mechanic, so you follow this at your own risk!! Don't blame me if it all
> goes wrong.)
>
>
> JPB357 <jpb357@jyifan.net> wrote in message
> news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> > It should be available from Nokia.
> >
> >
> > "Bear" <who@where.com> wrote in message
> > news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > > I've just got a second hand CARK126 car kit as well as holder and
> external
> > > antenna, but no install instructions. I'd like to try installing it
> > myself
> > > or should I take it to an installer - they want about $AUS200.....?
> > >
> > > Anybody any tips on the wiring and where to place it?
> > >
> > >
> >
> >
> >
>
>
#5
Guest
Posts: n/a
Re: Nokia car kit for Audi A4
In the book it mentions fitting a phone into the 'flip up' armrest between
the front seats.
Does this mean there is some wiring in there and how would I get to it?
"Mike Buckley" <mike@nochance.com> wrote in message
news:c8g3s8$c5p$1@hercules.btinternet.com...
> Easy. At your own risk of course, follow these:
>
> Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
> is a good source!
> Black cable to the negative/ground connection. Battery again, or a handy
> earth.
>
> That'll get it operational with constant power to the cradle.
> IF you want the goodies, like the cradle only being powered when the
> ignition is on, radio muting or an auto car-phone antenna, do these as
well:
>
> Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
> vehicle ignition key.
> Yellow cable - used for automatic car radio muting (XCRM) and is connected
> to car radio. No idea where on the radio tho!
> Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" -
used
> to trigger a relay for a motorised antenna for the phone, if you use one.
> The instructions specifically say to use a relay.
>
> As to placement - I fitted mine (into an old 80) by removing the passenger
> dash pocket and attaching the control box to the heater duct. There should
> be a bracket with the box that allows you to position the box somewhere
with
> a screw, but I just used cable-ties for speed.
>
> Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
> across the vehicle under the dash. Fiddly, but straightforward as long as
> you are double jointed and don't mind grovelling under the dash. Protect
the
> cable as appropriate. Mic is also good on by the centre mirror, but more
> hassle to lead the cable.
>
> Cradle on the centre consol or dash as you prefer.
>
> Of course, with a modern car you'll have an airbag in the left side which
> might restrict access to the under dash area. But if you want to risk
> fiddling with explosive devices which could kill you, that's your
decision.
> Is your life worth 200 bucks?? Your choice.
>
> Finally - you'll need an antenna - the manual warns about all that
microwave
> energy bouncing around inside the car and suggests it could interfere with
> vehicle electrical systems as well as your health. I used a dual band
> self-adhesive antenna that mounts on the w/screen and took the cable down
> behind the dash from there to the box. The phone will work without a
vehicle
> antenna. Again, your choice.
>
> Anyway, best of luck, its relatively easy, notwithstanding the caveat
> above - these instructions straight from a HF CARK-91 install guide and
iirc
> there might be similar on the web somewhere - Google will find it.
>
> All the plugs / fittings etc are self-explanatory in that they will only
fit
> the relevant sockets on the box anyway.
>
> Have fun but stay safe! Mike.
>
> (I'm NOT an expert in these things, just a reasonably competent amateur
> mechanic, so you follow this at your own risk!! Don't blame me if it all
> goes wrong.)
>
>
> JPB357 <jpb357@jyifan.net> wrote in message
> news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> > It should be available from Nokia.
> >
> >
> > "Bear" <who@where.com> wrote in message
> > news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > > I've just got a second hand CARK126 car kit as well as holder and
> external
> > > antenna, but no install instructions. I'd like to try installing it
> > myself
> > > or should I take it to an installer - they want about $AUS200.....?
> > >
> > > Anybody any tips on the wiring and where to place it?
> > >
> > >
> >
> >
> >
>
>
the front seats.
Does this mean there is some wiring in there and how would I get to it?
"Mike Buckley" <mike@nochance.com> wrote in message
news:c8g3s8$c5p$1@hercules.btinternet.com...
> Easy. At your own risk of course, follow these:
>
> Red Cable (with 2amp fuse) to + voltage on veh's power supply. The battery
> is a good source!
> Black cable to the negative/ground connection. Battery again, or a handy
> earth.
>
> That'll get it operational with constant power to the cradle.
> IF you want the goodies, like the cradle only being powered when the
> ignition is on, radio muting or an auto car-phone antenna, do these as
well:
>
> Blue cable (with 1 amp fuse) to a +12v voltage source controlled by the
> vehicle ignition key.
> Yellow cable - used for automatic car radio muting (XCRM) and is connected
> to car radio. No idea where on the radio tho!
> Green cable (with 1amp fuse) - 12 v output whenever the phone is "on" -
used
> to trigger a relay for a motorised antenna for the phone, if you use one.
> The instructions specifically say to use a relay.
>
> As to placement - I fitted mine (into an old 80) by removing the passenger
> dash pocket and attaching the control box to the heater duct. There should
> be a bracket with the box that allows you to position the box somewhere
with
> a screw, but I just used cable-ties for speed.
>
> Fit mic on the drivers A pillar (sticky velcro is good) and lead the cable
> across the vehicle under the dash. Fiddly, but straightforward as long as
> you are double jointed and don't mind grovelling under the dash. Protect
the
> cable as appropriate. Mic is also good on by the centre mirror, but more
> hassle to lead the cable.
>
> Cradle on the centre consol or dash as you prefer.
>
> Of course, with a modern car you'll have an airbag in the left side which
> might restrict access to the under dash area. But if you want to risk
> fiddling with explosive devices which could kill you, that's your
decision.
> Is your life worth 200 bucks?? Your choice.
>
> Finally - you'll need an antenna - the manual warns about all that
microwave
> energy bouncing around inside the car and suggests it could interfere with
> vehicle electrical systems as well as your health. I used a dual band
> self-adhesive antenna that mounts on the w/screen and took the cable down
> behind the dash from there to the box. The phone will work without a
vehicle
> antenna. Again, your choice.
>
> Anyway, best of luck, its relatively easy, notwithstanding the caveat
> above - these instructions straight from a HF CARK-91 install guide and
iirc
> there might be similar on the web somewhere - Google will find it.
>
> All the plugs / fittings etc are self-explanatory in that they will only
fit
> the relevant sockets on the box anyway.
>
> Have fun but stay safe! Mike.
>
> (I'm NOT an expert in these things, just a reasonably competent amateur
> mechanic, so you follow this at your own risk!! Don't blame me if it all
> goes wrong.)
>
>
> JPB357 <jpb357@jyifan.net> wrote in message
> news:QHvqc.2171$XW4.1882@fe37.usenetserver.com...
> > It should be available from Nokia.
> >
> >
> > "Bear" <who@where.com> wrote in message
> > news:40a9d70c$0$16577$5a62ac22@freenews.iinet.net. au...
> > > I've just got a second hand CARK126 car kit as well as holder and
> external
> > > antenna, but no install instructions. I'd like to try installing it
> > myself
> > > or should I take it to an installer - they want about $AUS200.....?
> > >
> > > Anybody any tips on the wiring and where to place it?
> > >
> > >
> >
> >
> >
>
>
#6
Guest
Posts: n/a
Re: Nokia car kit for Audi A4
Bear <who@where.com> wrote in message
news:40ac53a5$0$16606$5a62ac22@freenews.iinet.net. au...
> In the book it mentions fitting a phone into the 'flip up' armrest between
> the front seats.
> Does this mean there is some wiring in there and how would I get to it?
Certainly I've seen quite a few such installations - dont like em
personally, given the difficulty in using the phone with it placed there. I
have no idea whether there is any pre-installed wiring - doubt it, although
certainly newer cars are finally starting to be delivered with wiring in
place.
Ask your dealer?
As to getting to it - you'll probably need to do some trim removal. If thats
a challenge, I think you might really need to use the experts.
Best of luck - Mike.
Thread
Thread Starter
Forum
Replies
Last Post
Richard Brown
Audi Mailing List
0
02-23-2004 06:41 AM
EdG
Audi Mailing List
0
06-27-2003 04:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)