Audi 1.8 cylinder head bolt question
I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
head off. Can anyone tell me what size tool I need to fit the head bolts? I think they are maybe T-50 torx, but not sure. The tool has to be long to fit down inside the bores. If anyone knows what tool to use, and where I can get one, I would be most grateful. |
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder >head off. Can anyone tell me what size tool I need to fit the head >bolts? I think they are maybe T-50 torx, but not sure. The tool has to >be long to fit down inside the bores. If anyone knows what tool to use, >and where I can get one, I would be most grateful. It appears similar to a torx head but it's actually a polydrive. http://buy1.snapon.com/catalog/item....re&dir=catalog |
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder >head off. Can anyone tell me what size tool I need to fit the head >bolts? I think they are maybe T-50 torx, but not sure. The tool has to >be long to fit down inside the bores. If anyone knows what tool to use, >and where I can get one, I would be most grateful. It appears similar to a torx head but it's actually a polydrive. http://buy1.snapon.com/catalog/item....re&dir=catalog |
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder >head off. Can anyone tell me what size tool I need to fit the head >bolts? I think they are maybe T-50 torx, but not sure. The tool has to >be long to fit down inside the bores. If anyone knows what tool to use, >and where I can get one, I would be most grateful. It appears similar to a torx head but it's actually a polydrive. http://buy1.snapon.com/catalog/item....re&dir=catalog |
Re: Audi 1.8 cylinder head bolt question
On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder >head off. Can anyone tell me what size tool I need to fit the head >bolts? I think they are maybe T-50 torx, but not sure. The tool has to >be long to fit down inside the bores. If anyone knows what tool to use, >and where I can get one, I would be most grateful. It appears similar to a torx head but it's actually a polydrive. http://buy1.snapon.com/catalog/item....re&dir=catalog |
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says... > On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote: > > >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder > >head off. Can anyone tell me what size tool I need to fit the head > >bolts? I think they are maybe T-50 torx, but not sure. The tool has to > >be long to fit down inside the bores. If anyone knows what tool to use, > >and where I can get one, I would be most grateful. > > It appears similar to a torx head but it's actually a polydrive. > http://buy1.snapon.com/catalog/item....re&dir=catalog What's a polydrive? I clicked the link, but didn't have it. Where can I get one? > |
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says... > On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote: > > >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder > >head off. Can anyone tell me what size tool I need to fit the head > >bolts? I think they are maybe T-50 torx, but not sure. The tool has to > >be long to fit down inside the bores. If anyone knows what tool to use, > >and where I can get one, I would be most grateful. > > It appears similar to a torx head but it's actually a polydrive. > http://buy1.snapon.com/catalog/item....re&dir=catalog What's a polydrive? I clicked the link, but didn't have it. Where can I get one? > |
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says... > On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote: > > >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder > >head off. Can anyone tell me what size tool I need to fit the head > >bolts? I think they are maybe T-50 torx, but not sure. The tool has to > >be long to fit down inside the bores. If anyone knows what tool to use, > >and where I can get one, I would be most grateful. > > It appears similar to a torx head but it's actually a polydrive. > http://buy1.snapon.com/catalog/item....re&dir=catalog What's a polydrive? I clicked the link, but didn't have it. Where can I get one? > |
Re: Audi 1.8 cylinder head bolt question
In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
email@invalid.address says... > On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote: > > >I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder > >head off. Can anyone tell me what size tool I need to fit the head > >bolts? I think they are maybe T-50 torx, but not sure. The tool has to > >be long to fit down inside the bores. If anyone knows what tool to use, > >and where I can get one, I would be most grateful. > > It appears similar to a torx head but it's actually a polydrive. > http://buy1.snapon.com/catalog/item....re&dir=catalog What's a polydrive? I clicked the link, but didn't have it. Where can I get one? > |
Re: Audi 1.8 cylinder head bolt question
T_Diver@hotmail.com wrote: > In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>, > email@invalid.address says... > >> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote: >> >> >>> I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder >>> head off. Can anyone tell me what size tool I need to fit the head >>> bolts? I think they are maybe T-50 torx, but not sure. The tool has to >>> be long to fit down inside the bores. If anyone knows what tool to use, >>> and where I can get one, I would be most grateful. >>> >> It appears similar to a torx head but it's actually a polydrive. >> http://buy1.snapon.com/catalog/item....re&dir=catalog >> > > What's a polydrive? I clicked the link, but didn't have it. Where can > I get one? > Another site for the tool at a better price: http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9 |
All times are GMT -5. The time now is 11:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands