Camshaft sensor
01-20-2010, 08:09 PM
#1
Audi Forum - Posts like an A1
Thread Starter
Join Date: May 2008
Location: Connecticut
Posts: 3
Camshaft sensor
Hello Folks,
Need some advice... I need to replace the Camshaft sensor- left side, on my 2003 A6.
I can look down and see the sensor, but it is hard to reach to remove.
Do I need to move the anti-freeze reservoir to reach?
Is this a simple DIY procedure?
Thanks.
Frank
Need some advice... I need to replace the Camshaft sensor- left side, on my 2003 A6.
I can look down and see the sensor, but it is hard to reach to remove.
Do I need to move the anti-freeze reservoir to reach?
Is this a simple DIY procedure?
Thanks.
Frank
01-21-2010, 08:08 PM
#5
Audi Forum - Posts like an RS4
Join Date: Aug 2007
Location: Etobicoke
Posts: 864
Re: Camshaft sensor
Bank 2 is drivers side.
Just had the sensors replaced on my 2.8 and it was a PITA...passengers side is easy but drivers side is close to the firewall and a lot of things interfere with working back there.
You definitely need to move the reservoir to reach, may even have to disconnect one of the coolant hoses and spill the reservoir contents to get the sensor off and on there.
Just had the sensors replaced on my 2.8 and it was a PITA...passengers side is easy but drivers side is close to the firewall and a lot of things interfere with working back there.
You definitely need to move the reservoir to reach, may even have to disconnect one of the coolant hoses and spill the reservoir contents to get the sensor off and on there.
Thread
Thread Starter
Forum
Replies
Last Post
pablo_ottawa
A4-B6 - (Typ 8E/8H, 2001–2005)
1
05-02-2009 07:33 AM
jakemandue
A6-C5 - (Typ 4B, 1997–2004)
2
03-03-2009 10:10 AM
Interious
Audi Mailing List
3
11-23-2003 08:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
