Retract Brake Piston
In order to retract brake pistons on Audi A4, which way do I have to turn to retract them? I don't see any arrow on the calipers.
I am doing the rear brake pads. |
Re: Retract Brake Piston
Not too clear on what you are asking? Do you have the specialty tool in order to retract these?
|
Re: Retract Brake Piston
Rear brake pistons need to be screwed in not pushed in. I need to know which way I need to turn to retract them
|
Re: Retract Brake Piston
Should be counterclockwise, MAKE SURE THE EBRAKE IS OFF!!!
|
Re: Retract Brake Piston
Originally Posted by M4MMOTORS
(Post 138302)
Should be counterclockwise, MAKE SURE THE EBRAKE IS OFF!!!
|
Re: Retract Brake Piston
Most folks use the specialty tool for this job as it's safe and quick with the right tool.
What year is your A4 and were you able to retract the pistons without using the caliper piston tool? |
Re: Retract Brake Piston
Originally Posted by K04-S4
(Post 138348)
Most folks use the specialty tool for this job as it's safe and quick with the right tool.
What year is your A4 and were you able to retract the pistons without using the caliper piston tool? I used the tool in the below link. I don't think there are any more special tools than the bottom one unless you can just c-clamp it and pushes in. DRAPER EXPERT 18 PIECE BRAKE CALIPER WIND BACK TOOL KIT Car Repair Tools Find Brake Repair Tools Buy Tools CHEAP Online Even with the above tool, you still need to know which way to turn to retract your brake pistons. Mine is 04. |
Re: Retract Brake Piston
Your link is the correct type of tool that 1move asked about. Audi rear calipers typically require turning the threaded piston while applying pressure in order to retract. Most front calipers can be c-clamped to retract. Good on you as it sounds like your job went well.
|
Re: Retract Brake Piston
Originally Posted by K04-S4
(Post 138350)
Your link is the correct type of tool that 1move asked about. Audi rear calipers typically require turning the threaded piston while applying pressure in order to retract. Most front calipers can be c-clamped to retract. Good on you as it sounds like your job went well.
That was exactly what I was talking about and I wasn't sure which way to turn. When I did the brake job on Ford before, it had arrows pointing directions on calipers. But I didn't see any arrows on Audi calipers. |
All times are GMT -5. The time now is 05:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands