Podi malfuntioning
#1
Podi malfuntioning
Hey guys i just installed the Podi boost gauge and i gotta say, it looks awesome, but i feel like i messed up or something just isnt working properly.
When the car is off the gauge sits at -5 below zero, i dont know if its suppose to sit here but i always thought the needle would sweep all the way down to -30 when off, but it does read the boost of the car getting 15 psi and -20 at idle, im APR stage 1 right now, so those sound right to me.
I bought the mechanical boost gauge package if that helps any?
Thanks
When the car is off the gauge sits at -5 below zero, i dont know if its suppose to sit here but i always thought the needle would sweep all the way down to -30 when off, but it does read the boost of the car getting 15 psi and -20 at idle, im APR stage 1 right now, so those sound right to me.
I bought the mechanical boost gauge package if that helps any?
Thanks
#2
Re: Podi malfuntioning
Is there an adjustment screw for the zero position? With no power to the guage I would expect a mechanical to be at 0 and an electrical to be the lowest reading. Your readings when running look to be about right.
#3
Re: Podi malfuntioning
Hmm true, ill check and see about that adjustment screw, as of now everytime i shut the car off it stops at -5 and its a little annoying lol . thanks for help!
#5
Re: Podi malfuntioning
The guage is not mechanical.
I have a podi dash mount gauge also, 15psi petal to the metal, and -20 at idle sounds correct.
remember the guage is a simple pressure gauge so if your not generating any out flow exhaust then your car is sucking in air, hence the -20
-5 when the car is off also seems right to me, i double check and get back if i am wrong.
I have a podi dash mount gauge also, 15psi petal to the metal, and -20 at idle sounds correct.
remember the guage is a simple pressure gauge so if your not generating any out flow exhaust then your car is sucking in air, hence the -20
-5 when the car is off also seems right to me, i double check and get back if i am wrong.
Last edited by highway; 11-08-2011 at 10:41 AM.
#6
Re: Podi malfuntioning
Ok , it will shoot to 16-18 psi when its pedal to the medal so to say, and -20 at idle, the -5 is when the car is off and the needle is resting, i just thought it was weird that it was sitting at -5 when there is no vacuuming happening, just a little annoying, but i learned to live with it lol.
Last edited by MapleSyrup; 11-08-2011 at 10:52 PM. Reason: can't type :(
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)