DRL and HID Kit Help!
#1
DRL and HID Kit Help!
Hey guys, new here. I just bought my first audi and it came with a HID kit that was orderd on the internet (aftermarket). It has no daytime running lights now. The HID's are too powerfull so they flicker when they are used as DRL. How do i take out the HID and put the normal ones in. I read that you have to enable DRL somewhere. I had the bulbs needed. Its just that i need housing. Can anyone help? Thanks!
#2
Re: DRL and HID Kit Help!
Hey guys, new here. I just bought my first audi and it came with a HID kit that was orderd on the internet (aftermarket). It has no daytime running lights now. The HID's are too powerfull so they flicker when they are used as DRL. How do i take out the HID and put the normal ones in. I read that you have to enable DRL somewhere. I had the bulbs needed. Its just that i need housing. Can anyone help? Thanks!
https://www.audiforum.ca/audi-a4/616...eals-hids.html
#4
Re: DRL and HID Kit Help!
No ficker, they work fine. I want to remove them completely to put stock back but cant! I bought H7 bulbs and they dont fit in the headlight assembly. I have looked for hours and hours for a housing but cant find one or cant find a picture if it does have a housing. The HID's work fine its just there not daytime running lights so i have to take them out. I have no idea what he did, either take a relay out or something but its really pissing me off!!!!
#5
Re: DRL and HID Kit Help!
No ficker, they work fine. I want to remove them completely to put stock back but cant! I bought H7 bulbs and they dont fit in the headlight assembly. I have looked for hours and hours for a housing but cant find one or cant find a picture if it does have a housing. The HID's work fine its just there not daytime running lights so i have to take them out. I have no idea what he did, either take a relay out or something but its really pissing me off!!!!
Last edited by mksu19; 12-20-2010 at 10:50 PM.
#6
Re: DRL and HID Kit Help!
UPDATE 01-11-2010:This is apparently not a permanent fix. This afternoon my DRLs were on again.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
#7
Re: DRL and HID Kit Help!
UPDATE 01-11-2010:This is apparently not a permanent fix. This afternoon my DRLs were on again.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
#8
Re: DRL and HID Kit Help!
UPDATE 01-11-2010:This is apparently not a permanent fix. This afternoon my DRLs were on again.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
Really! I found this over in the VAG-COM forum....
http://forums.vwvortex.com/zer...13641
Quote, originally posted by logger »
Your friend should be able to turn DRLs on and off without VagCom. Just use the indicator stalk as I have described below. So you may have to come up with something else to offer. For example - the number of courtesy flashes the indicators give on momentary activation. default is 4 and you can set 1 to 5.
To change DRL state:
Left = DRL OFF
1) Headlight switch to OFF,
2) Select Left indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now OFF.
Right = DRL ON
1) Headlight switch to OFF,
2) Select Right indicator while
3) Simultaneously holding the stalk hard back towards you to flash the lights while
4) Simultaneously cycling IGN on for a couple seconds - until you hear the DING.
DRLs are now ON.
Worked on my TDI like magic
Got in the car, closed the door. Engine off, key in ignition, but not "on". Using the turn signal lever, I turned the left signal on while pulling it towards me, then I turned the key to the "on" position. Six "dings" later, the DRLs were off. Turned key "off"
From vwvortex. Might work.
Ill try this once i get back from work
Edit- I tried this many times. They still do not turn on. I have a vag com but cant find any clear instructions on how to do it! I really need to get this done ASAP since the holidays are around the corner and the saftey place are close on holidays. I have vag com HEX+CAN and version 10.6.3. Does anyone have instructions on how to do this with a vag com? Thanks!
Last edited by gurvir44; 12-21-2010 at 02:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jahnetik
Exterior & Body Mods
3
03-14-2012 12:25 PM
Richard Brown
Audi Mailing List
0
02-23-2004 06:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)