maxaudi

Thanks. Very much appreciated.

mpowered

1move a I fixed the issue last week at the meet. Thanks 1move! It is relatively easy to take apart the shifter console. Once you find the magnet it can be put back in proper position. One thing 1move found out is that the correct polarity of the magent must be maintained when inserting the magnet back in to place.

Thanks again 1move. This saved me mucho dinero's at the dealer!

maxaudi

Gentlemen, how did you remove the shifter cover ? Thanks.

mpowered

I will let 1move pipe in, he may have some documentation coming.

maxaudi

No problem. Thanks.

maarp

Here's a thread with info on removing the shift plate and reseating the magnets.

maxaudi

Thanks, maarp. My console is different. I was affraid to force it.

1move

iTrader: (1)

Here it is I did a write up that is way more simple then any of those other threads!
Click on the link below!

https://www.audiforum.ca/general-d-i...tml#post117737

maxaudi

Thanks, 1move. So... my A4 is a FWD (with CVT)... the procedure is not going to help. I had the car scanned today and it came back with a '17090 P0706 Transmission range sensor circuit'. How bad it is ?

1move

iTrader: (1)

Procedure is the same actually I verified when i got home.