Audi Forum - Audi Forums for the A4, S4, TT, A3, A6 and more!

Audi Forum - Audi Forums for the A4, S4, TT, A3, A6 and more! (https://www.audiforum.ca/)
-   A4-B5 - (Typ 8D, 1994–2001) (https://www.audiforum.ca/a4-b5-typ-8d-1994%962001-75/)
-   -   "Seafoam" to remove carbon deposits (https://www.audiforum.ca/a4-b5-typ-8d-1994%962001-75/seafoam-remove-carbon-deposits-59662/)

adamstasiak 10-04-2010 11:18 AM

"Seafoam" to remove carbon deposits
 
Just watched Utube about some seafoam to remove engine deposits. What is it?
Where to buy it?

plg_cp 10-04-2010 11:45 AM

Re: "Seafoam" to remove carbon deposits
 
Just do a search for "seafoam" on this forum, lots of discussion about it.

hoeser 10-04-2010 11:59 AM

Re: "Seafoam" to remove carbon deposits
 
You can get it at NAPA or Carquest. It can be added to fuel or oil.

It's actually pretty good. I use it to decarbon marine engines in very high seafoam to fuel ratios (like 1 can in only 5L of fuel). I don't know if I would recommend that for your audi though, but it works great on 2 stroke marine applications.

It comes in a liquid or pressurized spray container. It does work for removing carbon buildup (to some degree). If you can bleed some into your manifold through a vac line you'll find that the most effective. Do it outside in an open area because it will fog out your entire neighbourhood in white smoke.

sakimano 10-04-2010 01:14 PM

Re: "Seafoam" to remove carbon deposits
 
not applicable to your A4 really. I wouldn't concern yourself with it.

If you have a car with fuel stratified injection...and you believe deposits to be hurting your car, then consider looking deeper into it. Till then, not a concern.

hoeser 10-04-2010 01:22 PM

Re: "Seafoam" to remove carbon deposits
 
My FSI 3.2 has 76,000km on it and has never had the carbon deposits removed by any means that I know of (2nd owner). I'm pretty much right on the factory posted 0-60 times right now so I'm not really sure how much clout these "carbon buildup is horrible in FSI engines" claims actually have.

I guess I'll just have to pull the intake manifold and find out.

However, with that said, there is no harm in running a seafoam decarbon procedure on any car. It will always do more good than harm.

adamstasiak 10-04-2010 02:58 PM

Re: "Seafoam" to remove carbon deposits
 

Originally Posted by hoeser (Post 145915)
You can get it at NAPA or Carquest. It can be added to fuel or oil.

It's actually pretty good. I use it to decarbon marine engines in very high seafoam to fuel ratios (like 1 can in only 5L of fuel). I don't know if I would recommend that for your audi though, but it works great on 2 stroke marine applications.

It comes in a liquid or pressurized spray container. It does work for removing carbon buildup (to some degree). If you can bleed some into your manifold through a vac line you'll find that the most effective. Do it outside in an open area because it will fog out your entire neighbourhood in white smoke.

GOING to NAPA right now. Stand by for smoking the neighbourhood pictures

hoeser 10-04-2010 03:09 PM

Re: "Seafoam" to remove carbon deposits
 

Originally Posted by adamstasiak (Post 145941)
GOING to NAPA right now. Stand by for smoking the neighbourhood pictures


They'll be good ones. Some people say it's the carbon burning off but I'm pretty confident its a mixture of carbon burning and the seafoam itself burning. It doesn't stink all that bad but it produces TONNES of white smoke...

Another interesting point, when I run it in high concentrations on my Evinrude 140 looper 2 stroke I actually pick up 200-300rpm at the top end and a couple extra MPH running up the river. SeaFoam is volatile stuff...

mikeh 10-04-2010 04:26 PM

Re: "Seafoam" to remove carbon deposits
 
Looking forward the the you tube on this one!!!

adamstasiak 10-04-2010 05:02 PM

Re: "Seafoam" to remove carbon deposits
 
1 Attachment(s)
Just did the Seafoam and Deep Creep.
Poured it all down the air intake and on the K air filter.
Is it the right stuff?
I do not have a puff of smoke at all. There are nasty looking droplets of brownish black wet tar at the end of exhaust.
I used Techron in July so maybe I did not have any deposits.
The car runs better.


PS
On the new Tide Commercial (with the green shirt) who would you pick mom or daughter?

hoeser 10-05-2010 07:36 AM

Re: "Seafoam" to remove carbon deposits
 
I'm not sure pouring it into the air intake was a good idea, I believe there are O2 sensors in there that shouldn't get oily.

The best way is to get it into the manifold through vac line. Also, on a hot engine, you can pull the plugs and deep creep the cylinders - turn it over with the plugs out so you don't hydrolock. You may get a code you have to clear afterwards.

adamstasiak 10-05-2010 12:29 PM

Re: "Seafoam" to remove carbon deposits
 
Yes I did not want to get Check Engine Light. Seafoam works whatever it does. On the second day I have easier starts and there is some white smoke during hard acceleration.
It has probably dissolved some grime. Good product.

I just changed the spark plugs so I do not want to get them out again but I will do it in April 2011. Good Idea to get those rings luricated from the other side. Thank you

sakimano 10-07-2010 11:46 AM

Re: "Seafoam" to remove carbon deposits
 

Originally Posted by hoeser (Post 145934)
My FSI 3.2 has 76,000km on it and has never had the carbon deposits removed by any means that I know of (2nd owner). I'm pretty much right on the factory posted 0-60 times right now so I'm not really sure how much clout these "carbon buildup is horrible in FSI engines" claims actually have.

I guess I'll just have to pull the intake manifold and find out.

However, with that said, there is no harm in running a seafoam decarbon procedure on any car. It will always do more good than harm.

pretty aggressive comment. Hopefully this A4 owner, who listened to you somewhat blindly, isn't harmed by your advice. I'd be willing to bet that this is not the case.

this (thread) is going to get interesting in about 7 days...

adamstasiak 10-07-2010 11:54 AM

Re: "Seafoam" to remove carbon deposits
 
Do you think that my engine will be harmed in 7 days?
If so in what way?


All times are GMT -5. The time now is 12:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands