Car Alarm
it seems to be that my car alarm does not activate when i lock the car, i have a vag-com cable but i dont know where to go to check to see if it is enabled or not. any help would be much appriciated!
Cheers, Pat |
Re: Car Alarm
Originally Posted by Invicta
(Post 130556)
it seems to be that my car alarm does not activate when i lock the car, i have a vag-com cable but i dont know where to go to check to see if it is enabled or not. any help would be much appriciated!
Cheers, Pat |
Re: Car Alarm
the coding right now for module 35 is, 08192.
|
Re: Car Alarm
Originally Posted by Invicta
(Post 130567)
the coding right now for module 35 is, 08192.
C01,+00001 = Rear Lid Opening via Rear Lid Lock C02,+00002 = Anti-Theft Confirmation via Blink C03,+00004 = Selective Locking C04,+00008 = Anti-Theft-System C05,+00032 = Locking via Speed C06,+00064 = Comfort Closing via Remote Control C07,+00256 = Rear Lid Logic C08,+00512 = Remote Control "Close" Confirmation (1x Blink) C09,+02048 = Door/Window Logic (USA) C10,+04096 = Remote Control "Open" Confirmation (2x Blink) C11,+08192 = Remote Control ; That would mean you only have the remote control function; add 8 to the coding 8192+8=8200 to enable the Anti-theft System. Add other values for the options as shown above |
Re: Car Alarm
so lets say i want c10,c8,c04,c02 i would enter 8192+04096+00512+8+2="12810" this value as the new coding
|
Re: Car Alarm
and is there a way to make the horn beep when locking or just the lights?
|
Re: Car Alarm
Originally Posted by Invicta
(Post 130579)
so lets say i want c10,c8,c04,c02 i would enter 8192+04096+00512+8+2="12810" this value as the new coding
Originally Posted by Invicta
(Post 130580)
and is there a way to make the horn beep when locking or just the lights?
I think horn beep is +01024; vaguely remember a documentation error when I did this on my B5; suggest you try that as part of your coding value. |
Re: Car Alarm
right on thx alot! is there like a big list of codes somewhere that i can find all these codes for everything?
|
Re: Car Alarm
Find the Labels folder where you installed VCDS; Also look on the Ross-Tech: Home page under the Wiki
|
Re: Car Alarm
i checked the labels files and i can't open the files, and the ross-tech wiki is useless it doesn't give me any codings for any of the components... oh well, i got the main problem solved!
|
All times are GMT -5. The time now is 10:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands