2nd gen. A3 - (Typ 8P/8PA, 2003–present) Second generation (Typ 8P/8PA, 2003–present)

A3 wheels/rims min/max offset/width?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Nov 23, 2009 | 12:58 PM
  #1  
GGGGGG's Avatar
Thread Starter
Audi Forum - Posts like an A1
 
Joined: Nov 2009
Posts: 3
From: Toronto
GGGGGG is on a distinguished road
Default A3 wheels/rims min/max offset/width?

I have an 09 A3, 2.0 S-Line. No TPMS. Just bought 225/45 R17 winter tires, and need to get rims for them. Seems like there are a lot of options/variables out there size-wise.

Here is what I've been able to figure out cruising google and audi forums re my current stock 17" wheels (let me know if any of you know otherwise, as this info was not easy to find and gathered from all over):
-offset: 56
-backspacing: 6.45
-bolt pattern: 5-112
-measuring/design rim width: 7.5"

A few questions:
-I read somewhere that, for my car/tires, a measuring/design rim width in the range of 7" - 8.5" would work? Is this the correct range? Is the range dependent on anything else (ie the rim width)?
-What is the range of offset that would work? I found a good set of rims whose offset is 30. Will these rims work w/my winter tires/car?

Anything else i need to consider in buying rims?

Thanks for any help advice
Old Dec 10, 2009 | 11:09 AM
  #2  
sun1's Avatar
Audi Forum - Posts like an A1
 
Joined: Nov 2008
Posts: 6
From: Vancouver
sun1 is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

19X8.5 ET45 is the max you can go
Old Dec 30, 2009 | 11:43 AM
  #3  
GGGGGG's Avatar
Thread Starter
Audi Forum - Posts like an A1
 
Joined: Nov 2009
Posts: 3
From: Toronto
GGGGGG is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

Thx for replying sun1

I am looking at some 17" rims. +35mm offset, 8 inch rim width. Should work w/225/45 R17s on an 09 A3, right?

Thx for the help
Old Dec 30, 2009 | 04:19 PM
  #4  
JSC's Avatar
JSC
Audi Forum - Posts like an A4
 
Joined: Oct 2008
Posts: 139
From: Southern Alberta
JSC is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

Originally Posted by GGGGGG
I have an 09 A3, 2.0 S-Line. No TPMS. Just bought 225/45 R17 winter tires, and need to get rims for them. Seems like there are a lot of options/variables out there size-wise.

Here is what I've been able to figure out cruising google and audi forums re my current stock 17" wheels (let me know if any of you know otherwise, as this info was not easy to find and gathered from all over):
-offset: 56
-backspacing: 6.45
-bolt pattern: 5-112
-measuring/design rim width: 7.5"

A few questions:
-I read somewhere that, for my car/tires, a measuring/design rim width in the range of 7" - 8.5" would work? Is this the correct range? Is the range dependent on anything else (ie the rim width)?
-What is the range of offset that would work? I found a good set of rims whose offset is 30. Will these rims work w/my winter tires/car?

Anything else i need to consider in buying rims?

Thanks for any help advice
I would not expect an offset of 35 to work. I know guys were running offsets of 42-45, with good results, but some reported rubbing with offsets of 42. I had a set of wheels with an offset of 42 that Ronal promised would work, but I never did get them on my A3.
Old Dec 30, 2009 | 08:17 PM
  #5  
joanca's Avatar
Audi Forum - Posts like an A1
 
Joined: Sep 2009
Posts: 7
From: Greater Toronto Aerea
joanca is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

225x45x17 wintertires scrubbed inside rear fenders with offset 35. dealer swapped tires onto 45 offset rims today. loos ok to me now, but didn't have weight at the rear end yet.
Old Dec 31, 2009 | 08:41 AM
  #6  
sun1's Avatar
Audi Forum - Posts like an A1
 
Joined: Nov 2008
Posts: 6
From: Vancouver
sun1 is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

35 offset with 17" rim won't rub if you haven't lowered your car but its not gonna look good. 1cm off the fender?
Old Dec 31, 2009 | 09:03 AM
  #7  
joanca's Avatar
Audi Forum - Posts like an A1
 
Joined: Sep 2009
Posts: 7
From: Greater Toronto Aerea
joanca is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

Originally Posted by sun1
35 offset with 17" rim won't rub if you haven't lowered your car but its not gonna look good. 1cm off the fender?
SUN 1, didn't lower the A3, and 17" rims with 35 offset rubbed (225X45X 17 winter tires), thats why the dealer changed it to 45 offset rims......
Old Dec 31, 2009 | 09:08 AM
  #8  
sun1's Avatar
Audi Forum - Posts like an A1
 
Joined: Nov 2008
Posts: 6
From: Vancouver
sun1 is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

oh...why did you put on a ET 35 at the first place?your dealer should know better.... people usually use ET 42-50
Old Dec 31, 2009 | 04:31 PM
  #9  
joanca's Avatar
Audi Forum - Posts like an A1
 
Joined: Sep 2009
Posts: 7
From: Greater Toronto Aerea
joanca is on a distinguished road
Default Re: A3 wheels/rims min/max offset/width?

Originally Posted by sun1
oh...why did you put on a ET 35 at the first place?your dealer should know better.... people usually use ET 42-50
the winter tire package was included in the purchase deal. No charge for the change to the 45 offset rims.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mferreira424
MK2 Audi TT - 2006 to current
9
Jan 16, 2025 10:56 AM
Dinky_B6
Wheels & Tires
4
Apr 23, 2012 09:25 AM
andreway
2nd gen. A3 - (Typ 8P/8PA, 2003–present)
2
Nov 3, 2009 02:07 PM
andreway
General Audi Discussion
1
Oct 18, 2009 04:28 PM
fthores
Audi Mailing List
1
Dec 24, 2003 10:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:30 AM.