Forge Vacuum Operated Piston Diverter Valve & Blow Off Spacer
12-03-2008, 11:02 AM
#1
Banned
Thread Starter
Join Date: Dec 2008
Location: Michigan
Posts: 222
Forge Vacuum Operated Piston Diverter Valve & Blow Off Spacer
Piston Diverter Valve for VAG 2.0 FSiT
FREE SHIPPING WORLD WIDE!!
PLEASE ORDER HERE
Please See below for more information from Forge Motorsport's Website
We’re proud to announce another industry first for the Volkswagen and Audi tuning market from Forge Motorsport!
Many owners of any VAG vehicle equipped with the all new 2.0T FSI engine, have unfortunately discovered, that the OEM electronically controlled bypass valves, which bolts directly to the compressor cover of the turbocharger, have their limitations. If you are running increased boost pressures, after a software remap (chip), or the OEM valve is being subjected to high temperatures, the lifespan of the unit is significantly reduced. Even without any modifications taking place to the vehicle at all, this OEM valve has been shown to fail over time and it’s boost holding capacity also leaves some room for improvement.
We now have the world’s first fully engineered solution offering both significantly improved reliability as well as valve related boost response. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.
This product is applicable for all of the following 2.0 FSiT applications:
VW Golf MK5 GTI/Jetta GLI, VW Eos, VW Passat (B6)
Audi A3, Audi TT Audi A4 (B7)
SEAT Leon
Skoda Octavia
For all vehicles where the OEM valve is mounted remotely (8P Audi S3, MK5 Golf Edition 30 and the Seat Leon Cupra), please see product reference FMFSITVR. )
Atmospheric Blow Off spacer for VAG 2.0
FREE SHIPPING WORLD WIDE!!
PLEASE ORDER HERE
Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 2.0 litre FSi Turbo Engine, and the procurement of our own development/project car, we have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch ME9 engine management systems employed on the following vehicles: Audi A3 2.0T FSI , A3 1.4 TFSi, Audi B7 A4 2.0T FSI Volkswagen MK5 Golf GTI/Jetta GLI 2.0T FSI. Please note: This valve fits the turbocharger mounted solenoid valves and will not fit the latest 2007 on, remote mounted solenoid valves, on the S3, 30th Edition Golf and Leon Cupra R, which have a different bolt pattern. For these vehicles please see
FREE SHIPPING WORLD WIDE!!
PLEASE ORDER HERE
Please See below for more information from Forge Motorsport's Website
We’re proud to announce another industry first for the Volkswagen and Audi tuning market from Forge Motorsport!
Many owners of any VAG vehicle equipped with the all new 2.0T FSI engine, have unfortunately discovered, that the OEM electronically controlled bypass valves, which bolts directly to the compressor cover of the turbocharger, have their limitations. If you are running increased boost pressures, after a software remap (chip), or the OEM valve is being subjected to high temperatures, the lifespan of the unit is significantly reduced. Even without any modifications taking place to the vehicle at all, this OEM valve has been shown to fail over time and it’s boost holding capacity also leaves some room for improvement.
We now have the world’s first fully engineered solution offering both significantly improved reliability as well as valve related boost response. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.
This product is applicable for all of the following 2.0 FSiT applications:
VW Golf MK5 GTI/Jetta GLI, VW Eos, VW Passat (B6)
Audi A3, Audi TT Audi A4 (B7)
SEAT Leon
Skoda Octavia
For all vehicles where the OEM valve is mounted remotely (8P Audi S3, MK5 Golf Edition 30 and the Seat Leon Cupra), please see product reference FMFSITVR. )
Atmospheric Blow Off spacer for VAG 2.0
FREE SHIPPING WORLD WIDE!!
PLEASE ORDER HERE
Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 2.0 litre FSi Turbo Engine, and the procurement of our own development/project car, we have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch ME9 engine management systems employed on the following vehicles: Audi A3 2.0T FSI , A3 1.4 TFSi, Audi B7 A4 2.0T FSI Volkswagen MK5 Golf GTI/Jetta GLI 2.0T FSI. Please note: This valve fits the turbocharger mounted solenoid valves and will not fit the latest 2007 on, remote mounted solenoid valves, on the S3, 30th Edition Golf and Leon Cupra R, which have a different bolt pattern. For these vehicles please see
Thread
Thread Starter
Forum
Replies
Last Post
A4ridin
Audi parts for sale & wanted.
0
03-01-2012 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
