DIY: Power sunroof reset procedure
#12
Re: DIY: Power sunroof reset procedure
Procedure is only for an already installed sunroof, (for new sunroof contact me)
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
What is the procedure if you have replaced the sunroof and motor to reset the switch? I finally gave in and replaced my sunroof with broken linkage.
Thanks
#14
Re: DIY: Power sunroof reset procedure
Procedure is only for an already installed sunroof, (for new sunroof contact me)
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
lyle_mag
1st gen. A3 - (Typ 8L, 1996–2003)
3
10-18-2013 03:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)