DIY: Power sunroof reset procedure
04-16-2008, 07:11 PM
#1
DIY: Power sunroof reset procedure
Procedure is only for an already installed sunroof, (for new sunroof contact me)
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
07-10-2009, 07:45 PM
#2
Audi Forum - Posts like an A1
Join Date: Jul 2009
Location: Gravenhurst
Posts: 7
re: DIY: Power sunroof reset procedure
Hi 1Move,
I am a newby to this forum so you will have to bear with me. I have a '98 A4 with a sunroof that opens/closes/and generally has fits without warning. So much so that I have pulled the fuse. You talk about cleaning the contacts-where in the assembly are they and how do I get at them? Should I thenfollow the reset sequence set out on your post? Any help would be appreciated. Cheers.
I am a newby to this forum so you will have to bear with me. I have a '98 A4 with a sunroof that opens/closes/and generally has fits without warning. So much so that I have pulled the fuse. You talk about cleaning the contacts-where in the assembly are they and how do I get at them? Should I thenfollow the reset sequence set out on your post? Any help would be appreciated. Cheers.
Re: DIY: Power sunroof reset procedure
05-02-2011, 02:42 PM
#7
Re: DIY: Power sunroof reset procedure
In some cases battery reset, can screw it up but very rarely. It is mostly for when the motor gets replaced or the sunroof rails or proper operation open/close fails
08-19-2013, 09:06 AM
#8
Audi Forum - Posts like an A1
Join Date: Aug 2013
Location: St Clairsville Ohio
Posts: 2
Re: DIY: Power sunroof reset procedure
Procedure is only for an already installed sunroof, (for new sunroof contact me)
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
08-19-2013, 09:06 AM
#9
Audi Forum - Posts like an A1
Join Date: Aug 2013
Location: St Clairsville Ohio
Posts: 2
Re: DIY: Power sunroof reset procedure
Procedure is only for an already installed sunroof, (for new sunroof contact me)
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
1) Remove the interior light. Leave the rotary switch connected. Set the rotary switch to position one or two(comfort or fully open positions). During opening of the sunroof panel, remove the power supply plug of the sunroof motor. Switch off the ignition and remove the key.
2) Turn the sunroof rotary switch to position zero (closed). wait 30 seconds. Reconnect power supply plug to the motor and switch on ignition.
3) Turn the rotary switch quickly from closed to any open position and go back to closed position. Wait until the sunroof panel is closed and the clicking of the relay can be heard from the sunroof motor
4) within the next 5 seconds, pull the rotary switch (pull the lug of the ****). Hold the pulling function until the sunroof tilts, opens, and returnes to the closed position. It may take 8-10 seconds for roof movement to commence.
5) after the programming switch off the ignition for at least 15 seconds.
6) Check sunroof's functions,
Enjoy!!!!!!!!!
