For Sale: Audi S4 B5 Garrett Twin Turbo Kit $3650
#1
Audi S4 B5 Garrett Twin Turbo Kit $3650
Complete bolt on turbo kit for the S4 2.7L.
No mods necessary except where the factory O2’s connect to the firewall under the hood, they will need to be relocated due to the waste gates, and the coolant tank will need to be shifted over a little bit by just bending the tabs. Everything else will bolt right on.
All parts have been cleaned, inspected and remanufactured. No repair or modification will be necessary. This kit is ready to go
-V-band stainless manifolds (headers)
-- 2x freshly overhauled GARRETT T31 / T04B turbochargers, Stage 2 turbines, 0.63 A/R, H trim compressor 58X75mm impellers (same size as GTX3076R!), watercooled
-- 90mm mass air housing with cold air intake
-Hitachi mass air sensor with harness
- "034" silicone hose from Y pipe to mass air housing,
- Fresh set of spark plugs,
-2x 38mm Tial waste gates. (springs are small blue + large blue)
-oil drain pipes off of the turbo to the oil pan
-Downpipes from the turbines all the way back to a borla exhaust 2.5 inch into one 3 inch. (Doesn’t include the borla exhaust itself)
-ECU with Unitronics 870cc big turbo software (injectors not included)
-All of the o2 bungs and EGT bungs are in place. Will need to use two black EGT’s instead of one red and one black.
-Turbo gaskets, oil drain gaskets
send your question to KOZAKLS@YAHOO.CA
No mods necessary except where the factory O2’s connect to the firewall under the hood, they will need to be relocated due to the waste gates, and the coolant tank will need to be shifted over a little bit by just bending the tabs. Everything else will bolt right on.
All parts have been cleaned, inspected and remanufactured. No repair or modification will be necessary. This kit is ready to go
-V-band stainless manifolds (headers)
-- 2x freshly overhauled GARRETT T31 / T04B turbochargers, Stage 2 turbines, 0.63 A/R, H trim compressor 58X75mm impellers (same size as GTX3076R!), watercooled
-- 90mm mass air housing with cold air intake
-Hitachi mass air sensor with harness
- "034" silicone hose from Y pipe to mass air housing,
- Fresh set of spark plugs,
-2x 38mm Tial waste gates. (springs are small blue + large blue)
-oil drain pipes off of the turbo to the oil pan
-Downpipes from the turbines all the way back to a borla exhaust 2.5 inch into one 3 inch. (Doesn’t include the borla exhaust itself)
-ECU with Unitronics 870cc big turbo software (injectors not included)
-All of the o2 bungs and EGT bungs are in place. Will need to use two black EGT’s instead of one red and one black.
-Turbo gaskets, oil drain gaskets
send your question to KOZAKLS@YAHOO.CA
Thread
Thread Starter
Forum
Replies
Last Post
TwinTurbs
Audi Cars For Sale
6
03-19-2010 01:42 AM
sjmmail2000-247@yahoo.co.uk
Audi Mailing List
0
11-17-2009 01:11 AM
cekaestner@gmail.com
Audi Mailing List
3
10-07-2005 07:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)