timing belt
#2
Guest
Posts: n/a
Re: timing belt
"mw3" <ptl_mancer@yahoo.com> wrote in message
news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> how do i reajust the timing
>
You don't, they are adjusted when they are fitted new, if it has stretched &
become slack replace it,
Steve.
#3
Guest
Posts: n/a
Re: timing belt
"mw3" <ptl_mancer@yahoo.com> wrote in message
news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> how do i reajust the timing
>
You don't, they are adjusted when they are fitted new, if it has stretched &
become slack replace it,
Steve.
#4
Guest
Posts: n/a
Re: timing belt
"mw3" <ptl_mancer@yahoo.com> wrote in message
news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> how do i reajust the timing
>
You don't, they are adjusted when they are fitted new, if it has stretched &
become slack replace it,
Steve.
#5
Guest
Posts: n/a
Re: timing belt
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:42ea621a$0$378$cc9e4d1f@news.dial.pipex.com.. .
>
> "mw3" <ptl_mancer@yahoo.com> wrote in message
> news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> > how do i reajust the timing
> >
>
> You don't, they are adjusted when they are fitted new, if it has stretched
&
> become slack replace it,
>
> Steve.
>
>
are you therefore saying, as it stretches the timing goes out. There must be
a way of resetting it while this happens.
#6
Guest
Posts: n/a
Re: timing belt
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:42ea621a$0$378$cc9e4d1f@news.dial.pipex.com.. .
>
> "mw3" <ptl_mancer@yahoo.com> wrote in message
> news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> > how do i reajust the timing
> >
>
> You don't, they are adjusted when they are fitted new, if it has stretched
&
> become slack replace it,
>
> Steve.
>
>
are you therefore saying, as it stretches the timing goes out. There must be
a way of resetting it while this happens.
#7
Guest
Posts: n/a
Re: timing belt
"Steve68s" <steve68s(remove)@btinternet.com> wrote in message
news:42ea621a$0$378$cc9e4d1f@news.dial.pipex.com.. .
>
> "mw3" <ptl_mancer@yahoo.com> wrote in message
> news:1c1bac54a276cd4a05d8a16dd4c448cf@localhost.ta lkaboutautos.com...
> > how do i reajust the timing
> >
>
> You don't, they are adjusted when they are fitted new, if it has stretched
&
> become slack replace it,
>
> Steve.
>
>
are you therefore saying, as it stretches the timing goes out. There must be
a way of resetting it while this happens.
#8
Guest
Posts: n/a
Re: timing belt
ok..heres the deal,i changed my water pump on my 1992 audi 100cs,so i just
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help
#9
Guest
Posts: n/a
Re: timing belt
ok..heres the deal,i changed my water pump on my 1992 audi 100cs,so i just
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help
#10
Guest
Posts: n/a
Re: timing belt
ok..heres the deal,i changed my water pump on my 1992 audi 100cs,so i just
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help
took off the timing belt /not marking the location of the pulley.replaced
the timing belt/now the car will not the start.its not getting any fire
and i don't have a cloe of how to get it back in time...help