Solar Panel Sunroof not working
#14
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
Hello,
Do you have found the DC/DC-converter?
I would like to know where the DC/DC-converter is placed?
Can you tell me the tension at the input and output form this converter?
Is the 10,6V the input level?
How much power did this panel have?
Did the input and output have the same Ground?
Regards
Martin
#15
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
Hello,
Do you have found the DC/DC-converter?
I would like to know where the DC/DC-converter is placed?
Can you tell me the tension at the input and output form this converter?
Is the 10,6V the input level?
How much power did this panel have?
Did the input and output have the same Ground?
Regards
Martin
#16
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
Hello,
Do you have found the DC/DC-converter?
I would like to know where the DC/DC-converter is placed?
Can you tell me the tension at the input and output form this converter?
Is the 10,6V the input level?
How much power did this panel have?
Did the input and output have the same Ground?
Regards
Martin
#17
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
Hello,
Do you have found the DC/DC-converter?
I would like to know where the DC/DC-converter is placed?
Can you tell me the tension at the input and output form this converter?
Is the 10,6V the input level?
How much power did this panel have?
Did the input and output have the same Ground?
Regards
Martin
#18
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
"Martin Krumpholz" <mkr03@nurfuerspam.de> wrote in message
news:42bea09c$0$18647$14726298@news.sunsite.dk...
>
> Hello,
>
> Do you have found the DC/DC-converter?
It was contained in the "solar cell separation relay" mentioned in my
previouus post.
> I would like to know where the DC/DC-converter is placed?
Relay no 3 on the 13 way relay panel under the steering wheel
> Can you tell me the tension at the input and output form this converter?
Didn't check the output as I couldn't get to it easily.
> Is the 10,6V the input level?
Yes
> How much power did this panel have?
10.6 v measured at the two pins on the front of the panel (measure with
panel in 25% open mode to allow you to reach the pins and still expose the
panel ti light)>
> Did the input and output have the same Ground?
Appeared to be two wires all the way to the relay
>
> Regards
>
> Martin
#19
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
"Martin Krumpholz" <mkr03@nurfuerspam.de> wrote in message
news:42bea09c$0$18647$14726298@news.sunsite.dk...
>
> Hello,
>
> Do you have found the DC/DC-converter?
It was contained in the "solar cell separation relay" mentioned in my
previouus post.
> I would like to know where the DC/DC-converter is placed?
Relay no 3 on the 13 way relay panel under the steering wheel
> Can you tell me the tension at the input and output form this converter?
Didn't check the output as I couldn't get to it easily.
> Is the 10,6V the input level?
Yes
> How much power did this panel have?
10.6 v measured at the two pins on the front of the panel (measure with
panel in 25% open mode to allow you to reach the pins and still expose the
panel ti light)>
> Did the input and output have the same Ground?
Appeared to be two wires all the way to the relay
>
> Regards
>
> Martin
#20
Guest
Posts: n/a
Re: Solar Panel Sunroof not working
"Martin Krumpholz" <mkr03@nurfuerspam.de> wrote in message
news:42bea09c$0$18647$14726298@news.sunsite.dk...
>
> Hello,
>
> Do you have found the DC/DC-converter?
It was contained in the "solar cell separation relay" mentioned in my
previouus post.
> I would like to know where the DC/DC-converter is placed?
Relay no 3 on the 13 way relay panel under the steering wheel
> Can you tell me the tension at the input and output form this converter?
Didn't check the output as I couldn't get to it easily.
> Is the 10,6V the input level?
Yes
> How much power did this panel have?
10.6 v measured at the two pins on the front of the panel (measure with
panel in 25% open mode to allow you to reach the pins and still expose the
panel ti light)>
> Did the input and output have the same Ground?
Appeared to be two wires all the way to the relay
>
> Regards
>
> Martin