Audi 1.8 cylinder head bolt question
#11
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
T_Diver@hotmail.com wrote:
> In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
> email@invalid.address says...
>
>> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>>
>>
>>> I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>>> head off. Can anyone tell me what size tool I need to fit the head
>>> bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>>> be long to fit down inside the bores. If anyone knows what tool to use,
>>> and where I can get one, I would be most grateful.
>>>
>> It appears similar to a torx head but it's actually a polydrive.
>> http://buy1.snapon.com/catalog/item....re&dir=catalog
>>
>
> What's a polydrive? I clicked the link, but didn't have it. Where can
> I get one?
>
Another site for the tool at a better price:
http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
#12
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
T_Diver@hotmail.com wrote:
> In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
> email@invalid.address says...
>
>> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>>
>>
>>> I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>>> head off. Can anyone tell me what size tool I need to fit the head
>>> bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>>> be long to fit down inside the bores. If anyone knows what tool to use,
>>> and where I can get one, I would be most grateful.
>>>
>> It appears similar to a torx head but it's actually a polydrive.
>> http://buy1.snapon.com/catalog/item....re&dir=catalog
>>
>
> What's a polydrive? I clicked the link, but didn't have it. Where can
> I get one?
>
Another site for the tool at a better price:
http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
#13
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
T_Diver@hotmail.com wrote:
> In article <k5lqc3tt9sheb2hh1jh2fc60elocdoqeij@4ax.com>,
> email@invalid.address says...
>
>> On Wed, 22 Aug 2007 22:18:30 GMT, <T_Diver@hotmail.com> wrote:
>>
>>
>>> I have a 2001 Audi A4 1.8 turbo engine. I am trying to get the cylinder
>>> head off. Can anyone tell me what size tool I need to fit the head
>>> bolts? I think they are maybe T-50 torx, but not sure. The tool has to
>>> be long to fit down inside the bores. If anyone knows what tool to use,
>>> and where I can get one, I would be most grateful.
>>>
>> It appears similar to a torx head but it's actually a polydrive.
>> http://buy1.snapon.com/catalog/item....re&dir=catalog
>>
>
> What's a polydrive? I clicked the link, but didn't have it. Where can
> I get one?
>
Another site for the tool at a better price:
http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
#14
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
"Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
news:13crm6ij7962202@corp.supernews.com...
>> What's a polydrive? I clicked the link, but didn't have it. Where can I
>> get one?
>>
> Another site for the tool at a better price:
> http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
I find those zdmark tools on ebay.com often!
Or you could buy from http://www.metalnerd.com
Part number MN18T160 $20
I just bought their XZN (triple square) socket for the early 1.8t cylinder
heads so I could rebuild my 1997 1.8t engine.
Their tool was of excellent quality!
--
later,
dave
(One out of many daves)
#15
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
"Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
news:13crm6ij7962202@corp.supernews.com...
>> What's a polydrive? I clicked the link, but didn't have it. Where can I
>> get one?
>>
> Another site for the tool at a better price:
> http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
I find those zdmark tools on ebay.com often!
Or you could buy from http://www.metalnerd.com
Part number MN18T160 $20
I just bought their XZN (triple square) socket for the early 1.8t cylinder
heads so I could rebuild my 1997 1.8t engine.
Their tool was of excellent quality!
--
later,
dave
(One out of many daves)
#16
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
"Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
news:13crm6ij7962202@corp.supernews.com...
>> What's a polydrive? I clicked the link, but didn't have it. Where can I
>> get one?
>>
> Another site for the tool at a better price:
> http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
I find those zdmark tools on ebay.com often!
Or you could buy from http://www.metalnerd.com
Part number MN18T160 $20
I just bought their XZN (triple square) socket for the early 1.8t cylinder
heads so I could rebuild my 1997 1.8t engine.
Their tool was of excellent quality!
--
later,
dave
(One out of many daves)
#17
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
"Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
news:13crm6ij7962202@corp.supernews.com...
>> What's a polydrive? I clicked the link, but didn't have it. Where can I
>> get one?
>>
> Another site for the tool at a better price:
> http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
I find those zdmark tools on ebay.com often!
Or you could buy from http://www.metalnerd.com
Part number MN18T160 $20
I just bought their XZN (triple square) socket for the early 1.8t cylinder
heads so I could rebuild my 1997 1.8t engine.
Their tool was of excellent quality!
--
later,
dave
(One out of many daves)
#18
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <fSrzi.50515$YL5.48854@newssvr29.news.prodigy.net> , vwdoc1
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks
#19
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <fSrzi.50515$YL5.48854@newssvr29.news.prodigy.net> , vwdoc1
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks
#20
Guest
Posts: n/a
Re: Audi 1.8 cylinder head bolt question
In article <fSrzi.50515$YL5.48854@newssvr29.news.prodigy.net> , vwdoc1
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks
@hotmail.com says...
>
> "Tony" <tonyjNOSPAM@NOSPAMvisi.com> wrote in message
> news:13crm6ij7962202@corp.supernews.com...
>
> >> What's a polydrive? I clicked the link, but didn't have it. Where can I
> >> get one?
> >>
> > Another site for the tool at a better price:
> > http://www.zdmak.com/wbstore/main.as...OLKSWAGEN&bl=9
>
> I find those zdmark tools on ebay.com often!
>
> Or you could buy from http://www.metalnerd.com
> Part number MN18T160 $20
>
> I just bought their XZN (triple square) socket for the early 1.8t cylinder
> heads so I could rebuild my 1997 1.8t engine.
> Their tool was of excellent quality!
>
I would like to thank everyone who responded to my post. I appreciate
the info.
I have one more question...someone told me you could use an allen wrench
to remove the bolts, but to use the polydrive to install the new ones.
Has anyone done this? Any idea what size to use? Thanks