A6 2.7t upgrades...
#1
Guest
Posts: n/a
A6 2.7t upgrades...
Hello, looking for some input on chips and brakes...
I am considering the stage 1 chip from APR. I am also considering some
upgraded rotors...preferably annondized...I have lost interest in the rust.
At some point I may consider the Brembo calipers, but that is not on the
front burner...
fire away...
thanks,
Mark
I am considering the stage 1 chip from APR. I am also considering some
upgraded rotors...preferably annondized...I have lost interest in the rust.
At some point I may consider the Brembo calipers, but that is not on the
front burner...
fire away...
thanks,
Mark
#2
Guest
Posts: n/a
Re: A6 2.7t upgrades...
On Mon, 23 Feb 2004 05:42:35 GMT, Mark Semon
<msemon1@rochester.rr.com> wrote:
>Hello, looking for some input on chips and brakes...
>
>I am considering the stage 1 chip from APR. I am also considering some
>upgraded rotors...preferably annondized...I have lost interest in the rust.
What in heaven for?
Anodizing is a surface treatment and I'd heavily guess it'll be
removed quickly from the rotor. Very quickly.
So why pay for it in the first place?
>Mark
Regards
Wolfgang
--
* Audi A6 Avant TDI *
* reply to wolfgang dot pawlinetz at chello dot at *
<msemon1@rochester.rr.com> wrote:
>Hello, looking for some input on chips and brakes...
>
>I am considering the stage 1 chip from APR. I am also considering some
>upgraded rotors...preferably annondized...I have lost interest in the rust.
What in heaven for?
Anodizing is a surface treatment and I'd heavily guess it'll be
removed quickly from the rotor. Very quickly.
So why pay for it in the first place?
>Mark
Regards
Wolfgang
--
* Audi A6 Avant TDI *
* reply to wolfgang dot pawlinetz at chello dot at *
#3
Guest
Posts: n/a
Re: A6 2.7t upgrades...
"Mark Semon" <msemon1@rochester.rr.com> wrote in message
news:fpg_b.81158$%
> I am considering the stage 1 chip from APR. I am also considering some
> upgraded rotors...preferably annondized...I have lost interest in the
rust.
For brakes, check out:
http://www.ecstuning.com/stage/edpd/...tegory=Braking
They also carry some version of the rotors that are cadmium-plated,
which is supposed to reduce rusting. Haven't had a chance to try them
personally, so I can't vouch for their effectiveness, but overall, ECS
Tuning is a reputable establishment.
http://www.ecstuning.com/stage/image...comparison.jpg
Cheers,
Pete
Thread
Thread Starter
Forum
Replies
Last Post
tacotime
A4-B5 - (Typ 8D, 1994–2001)
11
08-25-2008 10:54 PM
Max_Boost
Performance Parts & Tuning
2
11-21-2007 07:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)