98 A6 Remote key programming
#2
Guest
Posts: n/a
Re: 98 A6 Remote key programming
Nisky Fam wrote:
> Who can tell me the secret of re programming my remote lock / unlock?
This procedure [culled from a discussion board] will reprog. the
remote[s] but not the immobilizer [if fitted]
David
************************************************** **********************************
1. Take the valet key, put it into the ignition and turn the key to the
"on" position, just prior to starting the car.
2. Roll down the driver's side window (not required, but a good idea in
case there's a problem).
3. Exit the car and close the door.
4. With a second key, physically lock the doors (don't use a remote).
5. Take the first remote to be programmed, press one of the buttons and
the lights will flash once. Wait 10 seconds and press the unlock
button. The doors should unlock. That first transmitter is now
programmed.
6. Lock the door again (physically) with the key, (not the remote).
7. Press one of the buttons twice, the lights will flash twice. Wait 10
seconds and press the unlock button. The doors should unlock. The
second transmitter is now programmed.
For a third transmitter press the button 3 times and for a fourth press
4 times.
#3
Guest
Posts: n/a
Re: 98 A6 Remote key programming
Nisky Fam wrote:
> Who can tell me the secret of re programming my remote lock / unlock?
This procedure [culled from a discussion board] will reprog. the
remote[s] but not the immobilizer [if fitted]
David
************************************************** **********************************
1. Take the valet key, put it into the ignition and turn the key to the
"on" position, just prior to starting the car.
2. Roll down the driver's side window (not required, but a good idea in
case there's a problem).
3. Exit the car and close the door.
4. With a second key, physically lock the doors (don't use a remote).
5. Take the first remote to be programmed, press one of the buttons and
the lights will flash once. Wait 10 seconds and press the unlock
button. The doors should unlock. That first transmitter is now
programmed.
6. Lock the door again (physically) with the key, (not the remote).
7. Press one of the buttons twice, the lights will flash twice. Wait 10
seconds and press the unlock button. The doors should unlock. The
second transmitter is now programmed.
For a third transmitter press the button 3 times and for a fourth press
4 times.
#4
Guest
Posts: n/a
Re: 98 A6 Remote key programming
Nisky Fam wrote:
> Who can tell me the secret of re programming my remote lock / unlock?
This procedure [culled from a discussion board] will reprog. the
remote[s] but not the immobilizer [if fitted]
David
************************************************** **********************************
1. Take the valet key, put it into the ignition and turn the key to the
"on" position, just prior to starting the car.
2. Roll down the driver's side window (not required, but a good idea in
case there's a problem).
3. Exit the car and close the door.
4. With a second key, physically lock the doors (don't use a remote).
5. Take the first remote to be programmed, press one of the buttons and
the lights will flash once. Wait 10 seconds and press the unlock
button. The doors should unlock. That first transmitter is now
programmed.
6. Lock the door again (physically) with the key, (not the remote).
7. Press one of the buttons twice, the lights will flash twice. Wait 10
seconds and press the unlock button. The doors should unlock. The
second transmitter is now programmed.
For a third transmitter press the button 3 times and for a fourth press
4 times.
Thread
Thread Starter
Forum
Replies
Last Post
rraj2k9
A4-B5 - (Typ 8D, 1994–2001)
1
06-23-2010 06:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)