2000 A6 rear brake rotors
#11
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
<uccoskun@gmail.com> wrote in message
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
#12
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
<uccoskun@gmail.com> wrote in message
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
#13
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
<uccoskun@gmail.com> wrote in message
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> hello guys, i'm tring to take them out to rotate.
Are you putting them on the front like tyres then ?
Never heard of anyone doing this. If they are worn below spec or juddery
just change them, they are less than £30 a piece.
Rgds
#14
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
I took them off by hammering. machined them for 10 dollars. The new
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
#15
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
I took them off by hammering. machined them for 10 dollars. The new
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
#16
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
I took them off by hammering. machined them for 10 dollars. The new
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
ones are 50 dollars for rears. total cost is a significant amount for
my budget. it works ok now. Now it is time to change front outer cv
boots.
Thanks for all inputs.
Alec wrote:
> <uccoskun@gmail.com> wrote in message
> news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > hello guys, i'm tring to take them out to rotate.
>
> Are you putting them on the front like tyres then ?
>
> Never heard of anyone doing this. If they are worn below spec or juddery
> just change them, they are less than £30 a piece.
> Rgds
#17
Guest
Posts: n/a
Re: Re: 2000 A6 rear brake rotors
"uccoskun" wrote:
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
#18
Guest
Posts: n/a
Re: Re: 2000 A6 rear brake rotors
"uccoskun" wrote:
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
#19
Guest
Posts: n/a
Re: Re: 2000 A6 rear brake rotors
"uccoskun" wrote:
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
> I took them off by hammering. machined them for 10 dollars.
> The new
> ones are 50 dollars for rears. total cost is a significant
> amount for
> my budget. it works ok now. Now it is time to change front
> outer cv
> boots.
>
> Thanks for all inputs.
>
> Alec wrote:
> > <uccoskun@gmail.com> wrote in message
> > news:1118935079.034986.12840@g49g2000cwa.googlegro ups.com...
> > > hello guys, i'm tring to take them out to rotate.
> >
> > Are you putting them on the front like tyres then ?
> >
> > Never heard of anyone doing this. If they are worn below
> spec or juddery
> > just change them, they are less than £30 a piece.
> > Rgds
Well,
Rear rotors were really stuck due to rust and hammering didn’t solved
it until we used a tripod puller. I pulled and pulled and
pulled, rotors were almost bending but were not budging. I hit it with
a hammer at that stage and it popped free. 8O
So you know.
--
Posted using the http://www. interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www./Audi-2000-...ict124839.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www./eform.php?p=610772
#20
Guest
Posts: n/a
Re: 2000 A6 rear brake rotors
The message <1_610772_c103d2c9a0bebb77dd39775dc1f1ba51@autofor umz.com>
from sinan <UseLinkToEmail@> contains these words:
> Rear rotors were really stuck due to rust
I hope you smeared the mating faces with copper grease this time!
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."
from sinan <UseLinkToEmail@> contains these words:
> Rear rotors were really stuck due to rust
I hope you smeared the mating faces with copper grease this time!
--
Skipweasel.
Ivor Cutler - "Never knowingly understood."