1990 Audi 200 Water Temp Light
#2
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
Check for corroded wires on the MFTS temperature sensor (near top radiator hose
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
#3
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
Check for corroded wires on the MFTS temperature sensor (near top radiator hose
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
#4
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
Check for corroded wires on the MFTS temperature sensor (near top radiator hose
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
#5
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
Check for corroded wires on the MFTS temperature sensor (near top radiator hose
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
where it attaches to engine.)
Also be sure that the coolant is to the correct level in the overflow tank. this
seems most likely to me. (Previously owned four T44s)
Probably not a fuse.
jamie wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
>
#6
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
On 2006-08-30, jamie <jamie.mcvaney@gmail.com> wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
#7
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
On 2006-08-30, jamie <jamie.mcvaney@gmail.com> wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
#8
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
On 2006-08-30, jamie <jamie.mcvaney@gmail.com> wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
#9
Guest
Posts: n/a
Re: 1990 Audi 200 Water Temp Light
On 2006-08-30, jamie <jamie.mcvaney@gmail.com> wrote:
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.
> I finally got my car back from the shop and the water temperature light
> started flashing periodically. the Temp gauge seems to be working fine
> but what would cause the light to start flashing? Bad fuse maybe?
On my 93 90S, I found this happen when my coolant level was very, very
low.
You might want to check yours too.