Bearing failure reason in advance
11-27-2014, 08:44 PM
#1
Audi Forum - Posts like an A1
Thread Starter
Join Date: May 2014
Location: China
Posts: 19
Bearing failure reason in advance
Improper assembly
16% due to an improper due to gather in different directions (usually hard...). Without the proper use of tools to ride. Some equipment, hydraulic machinery, by heat or correct and effective method of installation and operation. SKF to provide professional and technical engineering services based on a variety of tools and equipment complete the work, I the most simple and quick calculation cost and benefit. Use a special tool and technology professionals, with a maximum running time of the machine another solution.
Improper lubrication
Despite all the "free installation position, but in a sealed" still have 36% of the bearing damage due to the technology application of fat is not correct, improper use. Any inadequate lubrication, appearance of normal use early in life inevitably fail. As a result of the bearing is usually easier to manipulate components, mechanical equipment don't appear often lubrication. Unable to realize, under the condition of artificial SKF automatic lubrication system can develop better lubrication to achieve results. When asked to use Distributor Of SKF 6207 Bearings tools and techniques and effective lubrication grease, helps to significantly reduce downtime.
pollution
Accuracy of bearing parts, if they are fat, pollution and guidance, is not running. In addition, due to being noticed from grease seal of all directions, so a small part of the guide bearing failure of at least 14% before all is due to the pollution problem. Excellent manufacturing capability and SKF to guide the design, the most extreme working conditions, and provide solution to seal.
fatigue
If, according to the direction of the machine overload or in operation and maintenance, expire before 34% of the direction was caused by fatigue. Due to improper maintenance or consulting plenty of pressure "warning, in the" state and monitoring equipment, SKF detection and analysis, as a result, all of a sudden or accidental failure can be avoided. Products include series of SKF instrument installation of the software measurement data, database management system and operation mode of the monitoring and management of the key parameters.
16% due to an improper due to gather in different directions (usually hard...). Without the proper use of tools to ride. Some equipment, hydraulic machinery, by heat or correct and effective method of installation and operation. SKF to provide professional and technical engineering services based on a variety of tools and equipment complete the work, I the most simple and quick calculation cost and benefit. Use a special tool and technology professionals, with a maximum running time of the machine another solution.
Improper lubrication
Despite all the "free installation position, but in a sealed" still have 36% of the bearing damage due to the technology application of fat is not correct, improper use. Any inadequate lubrication, appearance of normal use early in life inevitably fail. As a result of the bearing is usually easier to manipulate components, mechanical equipment don't appear often lubrication. Unable to realize, under the condition of artificial SKF automatic lubrication system can develop better lubrication to achieve results. When asked to use Distributor Of SKF 6207 Bearings tools and techniques and effective lubrication grease, helps to significantly reduce downtime.
pollution
Accuracy of bearing parts, if they are fat, pollution and guidance, is not running. In addition, due to being noticed from grease seal of all directions, so a small part of the guide bearing failure of at least 14% before all is due to the pollution problem. Excellent manufacturing capability and SKF to guide the design, the most extreme working conditions, and provide solution to seal.
fatigue
If, according to the direction of the machine overload or in operation and maintenance, expire before 34% of the direction was caused by fatigue. Due to improper maintenance or consulting plenty of pressure "warning, in the" state and monitoring equipment, SKF detection and analysis, as a result, all of a sudden or accidental failure can be avoided. Products include series of SKF instrument installation of the software measurement data, database management system and operation mode of the monitoring and management of the key parameters.
Thread
Thread Starter
Forum
Replies
Last Post
4quality
A4-B5 - (Typ 8D, 1994–2001)
1
07-07-2009 07:37 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
