Vag-checker diy
#1
Vag-checker diy
Recoding time/date and miscellaneous – Select [17. Instruments], [1. Control Unit Info] and write down ECU coding if you would like to go back to those regular settings. Select [9. Code Module] Enter a 5-digit code from the numbers below.
First two digits of code are for optional equipment.
00 – no available equipment.
01 – brake pad wear sensor
02 – seatbelt warning active
04 – washer fluid level warning active.
16 – navigation system
Third digit of coding is for country code
1 – Europe (changes to 24hr clock, km)
2 – USA (changes to 12hr clock, miles)
3 – Canada (changes to 24hr clock, km) should be 12hr clock but didn’t work.
4 – Great Britian (changes to 24hr clock, miles)
5 – Japan (changes to 24hr clock, km)
6 – Saudi Arabia (changes to 24hr clock, km)
7 – Australia – (changes to 24hr clock, km)
Forth digit is for number of cylinders 3 No service interval [2002+ models]
4 – 4 cylinders
5 – 5 cylinders
6 – 6 cylinders
Fifth digit is number of travel impulses
0 – TDI engine
1 – 4358
2 – 3648
------------------------------------------------------------------------------------------------------------
Service Light Reset - [17. Instruments], [6. Adaption] enter “02” adapted number: 1 press down and adapted number: will change to 0 press [OK] service light has now been rest.
------------------------------------------------------------------------------------------------------------
Fuel level Indi. Ada. (Adjusts the instrument cluster fuel level) [17. Instruments], [6. Adaption] in channel enter “030” use up/down to change value [note: fuel level gauge should change as you do this] “OK” to save new value.
------------------------------------------------------------------------------------------------------------
Deactivate/Activate Airbags & Saftybelts. [15. Airbags], [8. Adaption] in channel enter
01 – for passenger air bag
02 - for drivers air bag
03 - for passenger side air bag
04 - for drivers side air bag
05 - for passenger seatbelt
06 - for drivers seatbelt.
Press up/down to change adaptation number. [0] to activate, [1] to deactivate. Press ok to save new value. To tell if a component is disabled, when ignition is first turned on, the airbag warning light will come on 3-4 seconds and will then blink for 15 seconds then go out.
------------------------------------------------------------------------------------------------------------
Airbag Fault Reset - [15. Airbag], [2. read fault code] write down code. Push right button to go back, and then select [4. Clear Fault Codes]
First two digits of code are for optional equipment.
00 – no available equipment.
01 – brake pad wear sensor
02 – seatbelt warning active
04 – washer fluid level warning active.
16 – navigation system
Third digit of coding is for country code
1 – Europe (changes to 24hr clock, km)
2 – USA (changes to 12hr clock, miles)
3 – Canada (changes to 24hr clock, km) should be 12hr clock but didn’t work.
4 – Great Britian (changes to 24hr clock, miles)
5 – Japan (changes to 24hr clock, km)
6 – Saudi Arabia (changes to 24hr clock, km)
7 – Australia – (changes to 24hr clock, km)
Forth digit is for number of cylinders 3 No service interval [2002+ models]
4 – 4 cylinders
5 – 5 cylinders
6 – 6 cylinders
Fifth digit is number of travel impulses
0 – TDI engine
1 – 4358
2 – 3648
------------------------------------------------------------------------------------------------------------
Service Light Reset - [17. Instruments], [6. Adaption] enter “02” adapted number: 1 press down and adapted number: will change to 0 press [OK] service light has now been rest.
------------------------------------------------------------------------------------------------------------
Fuel level Indi. Ada. (Adjusts the instrument cluster fuel level) [17. Instruments], [6. Adaption] in channel enter “030” use up/down to change value [note: fuel level gauge should change as you do this] “OK” to save new value.
------------------------------------------------------------------------------------------------------------
Deactivate/Activate Airbags & Saftybelts. [15. Airbags], [8. Adaption] in channel enter
01 – for passenger air bag
02 - for drivers air bag
03 - for passenger side air bag
04 - for drivers side air bag
05 - for passenger seatbelt
06 - for drivers seatbelt.
Press up/down to change adaptation number. [0] to activate, [1] to deactivate. Press ok to save new value. To tell if a component is disabled, when ignition is first turned on, the airbag warning light will come on 3-4 seconds and will then blink for 15 seconds then go out.
------------------------------------------------------------------------------------------------------------
Airbag Fault Reset - [15. Airbag], [2. read fault code] write down code. Push right button to go back, and then select [4. Clear Fault Codes]
Last edited by ---xXNateXx---; 04-25-2011 at 01:51 PM.
#3
Re: Vag-checker diy
BTW, I have the Pro version and want to know if I can program the transmission at all. When I hit the gas there is a lag before the trans engages and would like to remove the lag. Ideas?
Thanks,
Tom
Thanks,
Tom
Thread
Thread Starter
Forum
Replies
Last Post
Stuart
Audi Mailing List
2
11-30-2003 02:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)