Finally, Dappy exposed! | photo intense |
#1
Finally, Dappy exposed! | photo intense |
My Story
I've been lurking on this forum for nearly 2 years now, reading and viewing all the other nice A3s. I've never posted a single picture of my 2006 A3 2.0T DSG since I wanted to share what I could accomplish with it. I originally purchased it as a winter beater for my 2006 Lexus IS250. After driving it for the first winter, I enjoyed it's performance and fuel efficiency. In the end, I departed my beloved Lexus IS (more on this later) and decided to use the A3 as a full year daily driver.
Slowly, but surely, I started to modify the Audi. It wasn't planning on modifying it in any fashion. That promise was soon broken, especially since all my previous cars were tuned. I went mostly for cosmetic touches this time around - all show and no go. It's my daily family car, so I didn't want to abuse it too much. I'm finally satisfied with the end result and would like to share the finished project with the rest of the community.
Modifications:
Lighting
Well Done 6000K H11 HID low beams
Philips 6000K H7 HID foglights
V-LED license plate light
Exterior
Plasti-dipped grill surround
Tinted bumper turn signals
Cupra R Lip
OSIR carbon fibre DTM rear valence
3M carbon fibre Di-Noc deck spoiler
Suspension & Wheels
BBS CH-R 18x8 ET38
Sumitomo HTR ZII 225/40R18
H&R Premium Performance coilovers
Pictures were taken courtesy by my buddy J.Yu Design.
As noted earlier, it was a difficult decision to depart my Lexus IS. I adored it and wanted to keep it till the end. But, you know with cars, it's a promise that usually ends up being broken. I had it featured on Scraped Crusaders.
I look forward to keeping my A3 for a while, so I'll be "lurking" for sometime.
I've been lurking on this forum for nearly 2 years now, reading and viewing all the other nice A3s. I've never posted a single picture of my 2006 A3 2.0T DSG since I wanted to share what I could accomplish with it. I originally purchased it as a winter beater for my 2006 Lexus IS250. After driving it for the first winter, I enjoyed it's performance and fuel efficiency. In the end, I departed my beloved Lexus IS (more on this later) and decided to use the A3 as a full year daily driver.
Slowly, but surely, I started to modify the Audi. It wasn't planning on modifying it in any fashion. That promise was soon broken, especially since all my previous cars were tuned. I went mostly for cosmetic touches this time around - all show and no go. It's my daily family car, so I didn't want to abuse it too much. I'm finally satisfied with the end result and would like to share the finished project with the rest of the community.
Modifications:
Lighting
Well Done 6000K H11 HID low beams
Philips 6000K H7 HID foglights
V-LED license plate light
Exterior
Plasti-dipped grill surround
Tinted bumper turn signals
Cupra R Lip
OSIR carbon fibre DTM rear valence
3M carbon fibre Di-Noc deck spoiler
Suspension & Wheels
BBS CH-R 18x8 ET38
Sumitomo HTR ZII 225/40R18
H&R Premium Performance coilovers
Pictures were taken courtesy by my buddy J.Yu Design.
As noted earlier, it was a difficult decision to depart my Lexus IS. I adored it and wanted to keep it till the end. But, you know with cars, it's a promise that usually ends up being broken. I had it featured on Scraped Crusaders.
I look forward to keeping my A3 for a while, so I'll be "lurking" for sometime.
Last edited by dappy; 06-13-2012 at 06:39 PM.
#4
Re: Finally, Dappy exposed! | photo intense |
Thanks. I really do like the LED tails, but I'm too lazy to do the wiring and coding.
#6
Re: Finally, Dappy exposed! | photo intense |
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)